-
×InformationWindows update impacting certain printer icons and names. Microsoft is working on a solution.
Click here to learn moreInformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
-
×InformationWindows update impacting certain printer icons and names. Microsoft is working on a solution.
Click here to learn moreInformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
- HP Community
- Notebooks
- Notebook Hardware and Upgrade Questions
- Re: Adding SSD to HP pavilion 15-DK0015nt
Create an account on the HP Community to personalize your profile and ask a question
02-03-2020 02:41 PM
As i know my PC come with 1 free slot for hard drive its 2.5 inch. I want to add 2.5 inch SSD. But i dont know thickness of slot is that important. SSD which i probably buy is 7mm is it fits to slot. And i dont know my SATA version. SATA 1,2,3? Which one is right? I am quite amateur in this things. Thx for help.
Solved! Go to Solution.
Accepted Solutions
02-03-2020 02:56 PM
The specs says it is 7.2mm but you can use 7.0mm. Thicker may not fit physically but a bit thinner is ok, the screws will keep it in place.
All standard 2.5" HDD's for notebooks use SATA III or SATA 3 now.
Regards.
***
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
02-03-2020 02:56 PM
The specs says it is 7.2mm but you can use 7.0mm. Thicker may not fit physically but a bit thinner is ok, the screws will keep it in place.
All standard 2.5" HDD's for notebooks use SATA III or SATA 3 now.
Regards.
***
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Didn't find what you were looking for? Ask the community