CW-1598sa SSD upgrade

[Stevec83]

I have a cw-1598sa, Ryzen 7, 16GB & i'm thinking about adding an additional SSD alongside my existing Nvme drive.

Do you have any part numbers for brackets/cables that i would require please ? Or be able to point me in the right direction.

Cheers

[banhien · Accepted solution]

@Stevec83 

Manual

          http://h10032.www1.hp.com/ctg/Manual/c06248787.pdf

You need 2 more parts

•  The hard drive brackets are available using spare part number L19469-001.
•  The hard drive cable is available using spare part number L23889-001

which are N/A from HP. You can buy from

            https://www.newegg.com/p/1B4-001S-01261

            https://www.newegg.com/p/1B4-001S-01257

as mentioned on page 45. Manual also shows you how to add 2.5" HDD/SSD.

Regards.

[Stevec83]

HI,

Many thanks for this. 

I've had a look around for the parts & would seem that the cable is relatively easy to obtain.  The caddy, however, is proving to be elusive. Just as well i'm not in a rush lol.

Thanks again 🙂

[Jean-marc2]

hi

I have the same problem as you. For you it is a 12pin or 10pin?

thanks

[Stevec83]

I have no idea.  Didn't realise that there were 2 sizes.