cancel
rayjay1359 Top Student
Top Student
5 4 0 0
Message 1 of 11
724
Flag Post
HP Recommended

HDD cable and sleeve for Envy x360

ENVY x360 15M-CN0012DX
Microsoft Windows 10 (64-bit)

I have the above system that has 256gb storage provided by an M2 ssd. There is space for a 2.5" HDD drive and a ZIF connector available. Is this system able to take an additional 1TB HDD in this bay? If so does anyone know where I can get the correct rubber sleeve and the proper ZIF connector.

 

the manual says

rubber sleeve L20103-001

 

cable L21894-001

 

But the part store says these parts aren't available

 

 

10 REPLIES 10
Provost Provost
Provost
41,111 39,587 6,156 10,683
Message 2 of 11
678
Flag Post
HP Recommended

HDD cable and sleeve for Envy x360

That happens from time to time on newer models. It takes a while to fill in the replacement parts channels. 

 

Right now access to the manuals and such is very limited but we can likely find you a rubber sleeve and cable from a related model that will work. 

Reply
0 Kudos
rayjay1359 Top Student
Top Student
5 4 0 0
Message 3 of 11
672
Flag Post
HP Recommended

HDD cable and sleeve for Envy x360

any suggestions on a similar model that might work

 

looks like a sata connector on one end

and a flex cable that terminates in a ZIF connector on the other side

 

i haven't had it apart yet just going by the pictures in the manual (just want to open it once).

 

any help would be greatly appreciated

 

Reply
0 Kudos
Provost Provost
Provost
41,111 39,587 6,156 10,683
Message 4 of 11
661
Flag Post
HP Recommended

HDD cable and sleeve for Envy x360

I just bought a 14m-cd0000 and was waiting until the manuals were accessible again (they are) to check and see if maybe it has the same parts. It does not. Mine is 180 degrees opposite from yours: the cable turns in the other direction to attach to the zif cable The rubber sleeve is also 180 degrees different. The cables can look very similar but each one has a different number of pins. Mine, for example is very slender and connects to a tiny zif connector so you have to be very careful with it. You might check the HP Part Store (just google it) and when you navigate there you get a chat popup and see if one of the helpers can help you find a part. I am not going to go out on a limb and recommend something that might not work. 

Reply
0 Kudos
rayjay1359 Top Student
Top Student
5 4 0 0
Message 5 of 11
659
Flag Post
HP Recommended

HDD cable and sleeve for Envy x360

i'm going to check the parts store tonight

wish me luck

i'll let you know how helpful the helpers were

Reply
0 Kudos
KH85 Honor Student
Honor Student
3 2 0 0
Message 6 of 11
453
Flag Post
HP Recommended

HDD cable and sleeve for Envy x360

Any luck finding L20103-001?

Reply
0 Kudos
rayjay1359 Top Student
Top Student
5 4 0 0
Message 7 of 11
444
Flag Post
HP Recommended

HDD cable and sleeve for Envy x360

No I never did

I put a 500gig 970 EVO

i wanted to use the cable for an additional HDD

No luck

Please post if you find it

Good Luck

Reply
0 Kudos
Highlighted
dyun1dyun1 Top Student
Top Student
5 5 0 1
Message 8 of 11
184
Flag Post
HP Recommended

HDD cable and sleeve for Envy x360

I found the answer on another thread. It isn't perfect but I as I type, I have installed a Samsung Evo1TB SSD on my HP Envy x360 15 Ryzen.

 

Here is the link.

 

https://www.amazon.com/gp/product/B07KR4YD9Z/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1

If the link doesn't work here is the product name.

Laptop HDD Cable for HP Envy X360 15-CN 15-CN0007TX 15-CN0006TX 450.0ED02.0001

 

The cable worked and I used the generic enclosure/sleeve. It could be a little tighter, but I didn't think it was worth retrofitting anything.

So far so goo.

rayjay1359 Top Student
Top Student
5 4 0 0
Message 9 of 11
174
Flag Post
HP Recommended

HDD cable and sleeve for Envy x360

Amazon was out of stock

i used your part numbers to find it on ebay

ordered it

hoping for the best

thanks a lot for replying

 

Ray

 

Reply
0 Kudos
KH85 Honor Student
Honor Student
3 2 0 0
Message 10 of 11
149
Flag Post
HP Recommended

HDD cable and sleeve for Envy x360

The hard drive sleeve worked fine, the ribbon cable appeared to not have the right size connector but it does fit. Once inserted it sits snugly, the ears of the connector hold it in the center of the connector. I used this.

 

https://www.amazon.com/gp/product/B07GWQPQ1Y/

Reply
0 Kudos
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation