08-19-2010 07:40 AM
My laptop just died on me and will not power up. I need to read the contents of the hard drive to save my files before I trash this laptop. Of course HP has made a proprietary connection on these SATA hard drives so it is not possible to use my SATA to USB cables to connect my hard drive to a computer and copy over all the files I need to save.
I was wondering if anyone knew of an adapter that would either connect directly to the HP SATA connection to USB, or if there was an adapter which would turn the HP SATA connection to the STANDARD SATA connection.
08-19-2010 10:12 AM
You need to subtract something, not add something. There is a plastic connector bar over the SATA connection. Removing it will reveal the standard SATA interface.
08-19-2010 06:37 PM
Just need files off Hard Drive?
There's many type of adapters out there.
There's one that USB to IDE2.5/IDE3.5/SATA.
If you have a newer desktop with Sata that's even faster hooking up as a slave drive.
Pavilion DV6768SE HDMI Vista 32bit AMD 2.0 X2 3Gb 5300DDR2 320Gb
HP Slim s3712f 2.4ghz 3gb 500gb
11-09-2014 05:08 PM
I want to connect my HP dv2000 (fujitsu) hard drive to my desk top , but i cannot hook up my sATA connector , you said that take the plastic top out ,but how to do that , your help is very appreciated , my email is : victor_tan9@yahoo
- HP Notebook PCs - Reducing Heat Inside the PC to Prevent Overheating
- HP Notebook PCs - Computer Does Not Start and Emits an LED or Beep Code
- HP Notebook PCs - How to Power Reset your Laptop
- HP PCs - Computer Is Slow (Windows 10)
- HP Notebook PCs - Troubleshooting No LED Lights Glow During Startup or Boot