Keep backlit key board always on

[mtndweller1]

I have a new HP Envy x360. How do I keep my backlit key board always on?

[KrazyToad]

@mtndweller1

Welcome to HP Community

I have gone through your Post and would like to help

If the blacklight stays on for only a few seconds, the backlight timeout setting might need configuring in the BIOS.

NOTE: If there is not a setting for the backlight timing in the BIOS, this behavior might not be supported on the notebook.

Your BIOS version and screens might vary.

1. Restart the notebook, and then immediately press the F10 repeatedly until the BIOS opens.

2. When the BIOS opens, use the arrow keys to navigate to the Advanced tab.

3. Navigate to Built-in Device Options, and then press Enter.

   

4. In the Built-in Device Options, select Backlit keyboard timeout.

5. Press the spacebar to open the keyboard backlight settings, and then select the timeout setting you want.

   NOTE: If you select Never, the backlight remains on which could quickly drain the notebook battery power.

   

Link: https://support.hp.com/in-en/document/c01612362

Thank you

If the information I've provided was helpful, give us some reinforcement by clicking the "Solution Accepted" on this Post and it will also help other community members with similar issue.