• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.Windows 11 Support Center.
  • post a message
Common problems for Battery
We would like to share some of the most frequently asked questions about: Battery Reports, Hold a charge, Test and Calibrating Battery . Check out this link: Is your notebook plugged in and not charging?
HP Recommended
HP Pavilion Laptop 14-bf1xx
Microsoft Windows 10 (64-bit)

My laptop dies suddenly when indicator is showing plenty of battery.

I thought that it was my battery as the laptop is circa 3 years old but after replacing the battery I have the same issue.

Once unplugged it lasts 20-30minutes and then shuts off (normally showing around 60-70% battery remaining).

Help!

I've changed batteries.

I've run callibration!

NO idea what else to do! 

1 REPLY 1
HP Recommended

@RogoR1

 

Welcome to HP Community

 

I have gone through your Post and would like to help

 

Please reinstall the Microsoft ACPI Compliant Control Method Battery and check if that helps

 

Step 01. Click on the Start Button
Step 02. Type "Device Manager" in the start search box & open the Device Manager
Step 03. Look for Batteries and expand it by click on the + symbol on the left
Step 04. Right Click on "Microsoft ACPI Compliant Control Method Battery" & uninstall
Note: This Battery driver will get re-installed automatically when you restart the Notebook again
Step 05. Please Shutdown the Notebook
Step 06. Remove the Battery and unplug the Power Adapter ( For Notebooks with Removable Batteries )
Step 07. Press and Hold the Power Button for full 1 Minute
Step 08. Go ahead and put back the Battery and connect the Power Adapter and restart

 

Next update the BIOS from this Link: https://support.hp.com/us-en/drivers

 

If the issue persists run a Battery Test again to confirm the Hardware Functionality

 

- Hold the power button for at least five seconds to turn off the computer.
- Turn on the computer and immediately press Esc repeatedly, about once every second. 
- When the menu appears, press the F2 key.
- On the main menu, click Component Tests and Power > Battery

 

Let me know how it goes 😊

 

If the information I've provided was helpful, give us some reinforcement by clicking the "Solution Accepted" on this Post and it will also help other community members with similar issue.

KrazyToad
I Am An HP Employee

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.