No Boot after New Processor

[PurpleWave]

Hi,

I recently installed the AMD a10-4600M Processor in my laptop (Pavillion g6z-2200 CTO) and when I try to boot up the caps lock light blinks once every couple of seconds. I think I am going to install the old processor and see what happens; if successful then update bios, then put new processor back. Is this the right approach or is there something that would be less work. According to HP Caps lock blink codes its a cpu error.

[Riddle_Decipher]

@PurpleWave Welcome to HP Community!

I must let you know that HP neither supports nor recommends upgrading/changing the processor of the device, that said, if you've gone through the details on this link and have confirmed a hardware failure within the CPU, I suggest you talk to HP support and discuss your options, follow the below steps to get started:

1) Click on this link - http://www.hp.com/contacthp/

2) Click on Sign-in or select the product using the below step:

3) Enter the serial of your device.

4) Select the country from the drop-down.

5) Click on "Show Options".

Fill the web-form, to populate a case number and phone number for yourself!

Also, if you are having trouble navigating through the above options, it's most likely because the device is out of warranty, if yes? please send me a private message with the region you are contacting us from, 

here's how private messages work: Click here for details.

If you wish to thank me for my efforts, you could click on "Accept as solution" on my post as the solution should help others too.