Pavilion will not charge

[Jeansandgems]

Computer works only  with  the adapter. Battery is tested and found to be good but it will not charge.

[sandytechy20]

@Jeansandgems

Welcome to HP support community.

Let's try re-installing the Microsoft ACPI-Compliant Control Method Battery 

1) In the search box, type and open “Device Manager”. 
2) Expand “Batteries”. 
3) Right click the "Microsoft ACPI-Compliant Control Method Battery" that is listed there. 
4) Click on “Uninstall”. 
5) At the prompt put a check in the box to remove the current driver 
6) Shutdown the computer. 
7) Remove the battery for minute and then put it back in. 
8) When the computer comes back up it should automatically find the driver. 
9) Go to Device Manager. 
10) Expand Batteries. 
11) Right click the "Microsoft ACPI-Compliant Control Method Battery" that is listed there. 
12) Click "Search automatically for updated driver software". Do the same thing with Microsoft ACPI-Compliant Embedded Controller. 

Also, try updating the computer - 

Step 1 Windows Updates - 

1) In the search box, type and open Windows Updates. 
2) Check for updates. 
3) If the updates are available, click on install and restart the computer. 

Step 2 HP Support Assistant Updates - 

1) In the search box, type and open HP Support Assistant. 
2) Check for updates. 
3) If the updates are available, click on install and restart the computer. 

This document has the most relevant troubleshooting if your battery appears to be not charging. 

Battery Does not Power Notebook or Hold a Charge 

If the issue persists, Let's Run a battery test using F2 (during restart), if the test failed: 

Check with an alternate battery. 

Let me know how it goes.

To thank me for my efforts to help you, please mark my post as an accepted solution so that it benefits several others.

Cheers.