cancel
Showing results for 
Search instead for 
Did you mean: 
  • ×
    Information
    Fix HP Printer issue in macOS

    A [software component] will damage your computer message displays when printing or while installing - Click Here

    Information
    Fix Windows 10 Update Issues

    Resolve Windows 10 or update issues on HP computer or printer– Click Here

  • post a message
  • ×
    Information
    Fix HP Printer issue in macOS

    A [software component] will damage your computer message displays when printing or while installing - Click Here

    Information
    Fix Windows 10 Update Issues

    Resolve Windows 10 or update issues on HP computer or printer– Click Here

  • post a message
Highlighted
New member
5 2 0 0
Message 1 of 4
115
Flag Post

Power on USB Port when Envy X360 switched off? Drains battery

HP Recommended
Envy x360 Ryzen
Microsoft Windows 10 (64-bit)

I found that there is power still available on the USB port even though notebook itself is  powered down (not asleep) , so if leave a device in port it still uses power and drains battery?  I checked in Device Manager that all USB interface devices had Power management set to "Allow to switch off device".

Is there some other setting that I need to check or is this a dsign error or fault?

 

TIA,

Nick

3 REPLIES 3
Highlighted
HP Support Agent
HP Support Agent
31,166 31,116 2,598 3,904
Message 2 of 4
Flag Post
HP Recommended

@NickRF You will need to Understand Lithium-Ion and Smart Battery Technology: Click here for details

Resetting the ACPI battery driver may take care of this. There will be a hard reset mixed in as well, so the two methods combined typically help a lot with battery issues.

 

1. Go to Start, search for Device Manager, and open this result.

2. Expand batteries.

3. Right-click on the ACPI option (usually the 2nd option) and select delete or uninstall. Follow the prompts.

4. Shut down the computer. 

5. Disconnect the charger.

6. Remove the battery (skip this step, instead do a power reset: click here for steps)

7. Hold down the power button for 1 minute.

8. Insert the battery only.

9. Attempt to turn the battery on.

 

If this had an impact, it should behave differently.

If not, Press the power button and then tap the F2 key to invoke the startup menu.

 

Choose and click on the F10 key to invoke the BIOS.

 Use the System Configuration tab. Disable USB Charging and press the F10 key to save the changes and boot into Windows.

 

 

P.S: Welcome to HP Community 😉

 

Keep me posted, as I (Or a trusted colleague) shall follow-up on this case to ensure the concern has been addressed, 

And your device is up and running again, only in case you don't get back to us, first! 

That said, If the information I've provided was helpful, give us some reinforcement by clicking the solution and kudos buttons, 

That'll help us, and others see that we've got the answers!

Good Luck.

Riddle_Decipher
I am an HP Employee

0 Kudos
Highlighted
Author
New member
5 2 0 0
Message 3 of 4
Flag Post
HP Recommended

Hi,  you cannot remove the battery from a Envy x360, plus how do you "switch on the battery"? But I will check out the Bios menu.

0 Kudos
Highlighted
HP Support Agent
HP Support Agent
31,166 31,116 2,598 3,904
Message 4 of 4
Flag Post
HP Recommended

@NickRF I have updated the step on removing the battery, please check my post again

That said, let me know how that pans out once you make the BIOS changes.

Good luck!

Riddle_Decipher
I am an HP Employee

0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation