01-23-2012 09:41 AM - last edited on 04-18-2016 04:11 PM by OscarFuentes
Hi I'm currently the owner of a HP G62 B25sa and I was wondering if it would be possible for me to upgrade my ram from the 4gb supplied to 8gb I would purchase from amazon. Within the specifications it says that I has a 4gb limit but I'm not sure if this applies to the capacity per stick or the total ram. Here are the pages about my laptop and the ram I am looking to purchase; any help would be greatly appreciated! Thanks for looking!!!!
Product specs: http://support.hp.com/us-en/document/c02550752
Solved! View Solution.
Re: Ram upgrade for HP G62
01-23-2012 10:26 AM
Yes, the 8 GB set you posted should work just fine, but it will only run at 1066 MHz per the service manual.
01-23-2012 10:22 AM
The service manual states you can upgrade to 8 GB of memory.
Your notebook I believe, comes installed with one 4 GB chip, so you should only need to purchase another 4 GB PC3-10600 module.
01-23-2012 10:24 AM
Hi thanks for the response
My laptop currently has 2x2gb sticks of ram so if I was to purchase the 2x4gb of ram off the amazon link I provided would that be adequate.
Thanks for all the help!!
04-13-2013 02:40 PM
Just wondering if you managed to get this working? I got some RAM with the same specs from Ebay here here
I have installed the RAM and although I have a 64bit OS installed it will only see 4gb, also in BIOS it will only see 4gb
04-16-2013 02:33 PM
You want to know about upgraded memory on your computer.
What is the model and product number on your computer?
You can find the information by hold the FN key and pressing the ESC key.
Please respond at your earlier convenience.
Clicking the White Kudos star on the left is a way to say Thanks!
Let me know how everything goes.
Have a good day.
- HP Notebook PCs - Reducing Heat Inside the PC to Prevent Overheating
- HP Notebook PCs - Computer Does Not Start and Emits an LED or Beep Code
- HP Notebook PCs - How to Power Reset your Laptop
- HP PCs - Computer Is Slow (Windows 10)
- HP Notebook PCs - Troubleshooting No LED Lights Glow During Startup or Boot