-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Notebooks
- Notebook Hardware and Upgrade Questions
- Re: SD card stuck in spectre x360

Create an account on the HP Community to personalize your profile and ask a question
03-26-2018 06:14 PM - edited 03-26-2018 06:26 PM
I inserted an SD memory card from my camera into the SD slot on the left hand side of my HP Spectre x360 (Model-13-4010CA).
The card was properly inserted as it was read by the PC.
Now I cannot remove the card, as it appears to be stuck. There is no handle, and no spring-action eject.
Can anyone tell me how do I get the card out?
Solved! Go to Solution.
Accepted Solutions
03-26-2018 11:04 PM
Did the card push in all the way in now to the point you cannot grab it?
Depending on how the mechanism failed inside, you will have to get creative.
You might have to gently pry on it with a thin blade or such. Push up or down and see if it will pry out.
One user had this and used a piece of tape, stuck it to the card and pulled it out.
03-26-2018 09:43 PM - edited 03-26-2018 09:45 PM
From the User Guide >>
To remove a card:
▲ Press in on the card it until it pops out.
**Click Accept as Solution on a Reply that solves your issue**
***Click the "YES" button if you think this response was helpful.***
03-26-2018 11:04 PM
Did the card push in all the way in now to the point you cannot grab it?
Depending on how the mechanism failed inside, you will have to get creative.
You might have to gently pry on it with a thin blade or such. Push up or down and see if it will pry out.
One user had this and used a piece of tape, stuck it to the card and pulled it out.
03-27-2018 07:33 AM
Thanks Cheryl, but that is how the Card got stuck in the first place. I inserted the Card, it was read, then when I tried to get it to eject by pressing on it, it just slid all the way in and did not pop out as expected. That is why I wrote that there was no spring-action eject! Thanks again for the good intentions.
03-27-2018 11:26 AM
No problem @Laszlo1 You aren't the first post about the issue on another model but I wasn't sure if I was missing something on your model. That is why I pinged @Photoray002 -he has used that specific Spectre and I thought he might know more.
Keep those roofing nails handy.:smileyvery-happy:
**Click Accept as Solution on a Reply that solves your issue**
***Click the "YES" button if you think this response was helpful.***