-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
- HP Community
- Notebooks
- Notebook Hardware and Upgrade Questions
- Re: Upgrade SSD
Create an account on the HP Community to personalize your profile and ask a question
07-06-2024 09:55 AM
I have an Envy 15t-es000 360 touch with 512 GB Intel SSD + 32 GB Intel Optane memory. My local disk (C:) is almost used up primarily due to installed apps. With this laptop, am I able to switch out the 512 GB SSD and upgrade to a 2TB SSD? And if it is upgradeable, what is the best SSD for this laptop?
Solved! Go to Solution.
Accepted Solutions
07-06-2024 11:10 AM - edited 07-06-2024 11:14 AM
You are able to install a different NVMe SSD, but before removing the existing drive, you need to disable the Intel Optane memory in the Intel RST software and in the BIOS (if your notebook's BIOS a setting to disable the Optane memory).
Suggested replacements:
Your notebook's M.2 SSD slot is PCIe Gen 3.0, and a Gen 4.0 SSD will work but not run at its maximum advertised read/write speeds.
However, you may want to transfer the drive to a newer notebook or desktop PC in the future that has a PCIe Gen 4.0 SSD slot.
This would be the drive I recommend if you want to go that route:
or this one which costs less but has slower read/write speeds:
If you want to stay with a PCIe Gen 3.0 drive, I recommend this one:
Below is the link to the service manual:
Maintenance and Service Guide (hp.com)
If your notebook is supported by the HP cloud recovery tool, make a bootable USB recovery drive to reinstall Windows.
You can make the recovery drive now:
HP Consumer PCs - Using the HP Cloud Recovery Tool in Windows 11 and 10 | HP® Support
You can download the software from the Microsoft Store:
HP Cloud Recovery Tool - Free download and install on Windows | Microsoft Store
07-06-2024 11:10 AM - edited 07-06-2024 11:14 AM
You are able to install a different NVMe SSD, but before removing the existing drive, you need to disable the Intel Optane memory in the Intel RST software and in the BIOS (if your notebook's BIOS a setting to disable the Optane memory).
Suggested replacements:
Your notebook's M.2 SSD slot is PCIe Gen 3.0, and a Gen 4.0 SSD will work but not run at its maximum advertised read/write speeds.
However, you may want to transfer the drive to a newer notebook or desktop PC in the future that has a PCIe Gen 4.0 SSD slot.
This would be the drive I recommend if you want to go that route:
or this one which costs less but has slower read/write speeds:
If you want to stay with a PCIe Gen 3.0 drive, I recommend this one:
Below is the link to the service manual:
Maintenance and Service Guide (hp.com)
If your notebook is supported by the HP cloud recovery tool, make a bootable USB recovery drive to reinstall Windows.
You can make the recovery drive now:
HP Consumer PCs - Using the HP Cloud Recovery Tool in Windows 11 and 10 | HP® Support
You can download the software from the Microsoft Store:
HP Cloud Recovery Tool - Free download and install on Windows | Microsoft Store