cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Vedut
New member
2 0 0 0
Message 1 of 2
54
Flag Post
HP Recommended

battery plug in not charging

HP notebook 15c
Microsoft Windows 10 (64-bit)

my battery dies in 4mins and it says plugged in not charging and don't tell me that go to battery and uninstall and power up cuz i have already done that and nothing happened

1 REPLY 1
Retired
Retired
17,747 17,730 1,288 1,954
Message 2 of 2
33
Flag Post
HP Recommended

battery plug in not charging

Hi! @Vedut

 

Have you tried charging your laptop using a different adapter or battery?

 

Were there any recent windows update on the PC?

 

Please share the product number of the PC to assist you better.

 

Try updating the Windows to the latest version and check if it helps.

 

Try updating the BIOS and chipset drivers on the PC to the latest version using HP support assistant and check if it helps.

 

Refer this article to know more information about using the HP support assistant. Click Here

 

Try the steps recommended below.

 

Run Power Troubleshooter.

On Cortana, enter  Troubleshooter then select Troubleshooting.
Click Improve power usage to open the window, then click Next. 
This should run the troubleshooter, and can fix any detected issues. You may try restarting your computer and charge your battery again.

 

Also, Try performing a hard reset on your laptop and check if it helps.

  1. Turn off the computer.

  2. Remove the computer from any port replicator or docking station.

  3. Disconnect all external connected peripheral devices such as USB storage devices, external displays, and printers.

  4. Unplug the AC adapter from the computer.

  5. Remove the battery from the battery compartment.

  6. With the battery and power cord unplugged, press and hold the Power button for about 15 seconds to drain any residual electrical charge from the capacitors.

  7. Insert the battery and plug the AC adapter back into the laptop, but do not connect any of the peripheral devices.

  8. Press the Power button to turn on the computer.

    The computer starts normally or a startup menu opens.

    NOTE: 

    If your computer does not start after pressing the Power button, then a power reset did not resolve the startup issue. SeeAdditional resources for further troubleshooting steps.

  9. If a startup menu opens, use the arrow keys to select Start Windows Normally, and then press the Enter key.

Lastly, try running a battery test from the F2 system diagnostics page and check if it helps.

 

Refer this article to know more information about running system diagnostics on your PC. Click Here

 

Let me know how it goes!

Take Care! 🙂

 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

A4Apollo
I am an HP Employee

Reply
0 Kudos
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation