A [software component] will damage your computer message displays when printing or while installing - Click Here
Resolve Windows 10 or update issues on HP computer or printer– Click Here
power supply is not continuous. its interrupted couple of seconds and resumes back. charger is plugged in. i hope picx can explain
@CiS1 I have a few steps listed below that should help you resolve this concern:
Unplug the charge, Turn off the laptop and turn it back on after 30mins.
Reinstall Microsoft ACPI-Compliant Control Method Battery under device manager:
1) In the search box, type and open “Device Manager”.
2) Expand “Batteries”.
3) Right-click the "Microsoft ACPI-Compliant Control Method Battery" that is listed there.
4) Click on “Uninstall”.
5) At the prompt put a check in the box to remove the current driver
6) Shutdown the computer.
7) Remove the battery for a minute and then put it back in. (Skip this step if you have a non removable battery)
8 - When the computer comes back up it should automatically find the driver.
9) Go to Device Manager.
10) Expand Batteries.
11) Right-click the "Microsoft ACPI-Compliant Control Method Battery" that is listed there.
12) Click "Search automatically for updated driver software"
Do the same thing with Microsoft ACPI-Compliant Embedded Controller.
If the issue persists, run a battery and adapter test using the steps mentioned in this link: Click here
P.S: Welcome to HP Community 😉
Keep us posted,
If you would like to thank us for our efforts to help you,
Give us a virtual high-five by clicking the 'Thumbs Up' icon below, followed by clicking on the "Accept as solution" on this post,
Have a great day!
Riddle_Decipher I am an HP Employee
Didn't find what you were looking for?
Ask the community