cancel
Showing results for 
Search instead for 
Did you mean: 
  • ×
    Information
    Fix HP Printer issue in macOS

    A [software component] will damage your computer message displays when printing or while installing - Click Here

    Information
    Fix Windows 10 Update Issues

    Resolve Windows 10 or update issues on HP computer or printer– Click Here

  • post a message
  • ×
    Information
    Fix HP Printer issue in macOS

    A [software component] will damage your computer message displays when printing or while installing - Click Here

    Information
    Fix Windows 10 Update Issues

    Resolve Windows 10 or update issues on HP computer or printer– Click Here

  • post a message
Highlighted
New member
1 0 0 0
Message 1 of 2
78
Flag Post

power supply

HP Recommended
Microsoft Windows 10 (64-bit)

power supply is not continuous. its interrupted couple of seconds and resumes back. charger is plugged in. i hope picx can explain

CiS1_0-1602253590450.png

CiS1_1-1602253615161.png

CiS1_0-1602253860347.png

 

 

 

1 REPLY 1
HP Support Agent
HP Support Agent
31,166 31,116 2,597 3,901
Message 2 of 2
Flag Post
HP Recommended

@CiS1 I have a few steps listed below that should help you resolve this concern:

Unplug the charge, Turn off the laptop and turn it back on after 30mins.

Reinstall Microsoft ACPI-Compliant Control Method Battery under device manager:

1) In the search box, type and open “Device Manager”.

2) Expand “Batteries”.

3) Right-click the "Microsoft ACPI-Compliant Control Method Battery" that is listed there.

4) Click on “Uninstall”.

5) At the prompt put a check in the box to remove the current driver

6) Shutdown the computer.

7) Remove the battery for a minute and then put it back in. (Skip this step if you have a non removable battery)

8 - When the computer comes back up it should automatically find the driver.

9) Go to Device Manager.

10) Expand Batteries.

11) Right-click the "Microsoft ACPI-Compliant Control Method Battery" that is listed there.

12) Click "Search automatically for updated driver software"

Do the same thing with Microsoft ACPI-Compliant Embedded Controller.

 

If the issue persists, run a battery and adapter test using the steps mentioned in this link: Click here

 

P.S: Welcome to HP Community 😉

 

Keep us posted,

If you would like to thank us for our efforts to help you, 

Give us a virtual high-five by clicking the 'Thumbs Up' icon below, followed by clicking on the "Accept as solution" on this post, 

Have a great day! 

Riddle_Decipher
I am an HP Employee

Reply
0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation