11-18-2019 09:42 AM
I am the owner of the HP Dv6-6159er laptop. My case is: I’m sitting quietly using a laptop, playing toys, deciding to update the graphics drivers for better performance, downloading everything from the HP official site after installation, everything worked fine, but after a while the case appeared that the laptop sometimes doesn’t start and a white line flashes and everything after idle time It worked for 2-3 hours and the time it took to wait was always increased, I immediately suspected that the BIOS was to blame and decided to roll back the BIOS and then put the same version back into the BIOS, I installed the old version but that new version BIOS does not become GSI write error: InsydeFlash can not load the driver. Please close all applications. If you run this utility in Windows 7, please run as Administrator. Or the BIOS did not support InsydeFlash. I closed all the programs, launched as administrator these methods do not help. I ask you to help me install BIOS F.1B Rev.A in place of BIOS F.13
I Excuse me i speak english badly
11-18-2019 10:30 AM
Simply put, how to upgrade Bios F.13 to Bios F.1 Rev. A If errors get out: InsydeFlash can not load the driver. Please close all applications. If you run this utility in Windows 7, please run as Administrator. Or an error: BIOS did not support InsydeFlash.
11-20-2019 06:08 PM
@RPG_MoNsTeR Welcome to HP Community!
Click here to perform a harder reset on your device
If the issue persists, after the above steps, try the below:
Turn off the notebook.
Plug the notebook into a power source using the power adapter.
With the notebook off, press and hold the Windows logo key and the B key at the same time.
On some notebook models, it might be necessary to press and hold the Windows logo key and the V key.
While pressing those keys, press and hold the Power button on the computer for 2 to 3 seconds, and then release the Power button but continue to hold the Windows logo key and the B or V key until the HP BIOS update screen displays or you hear a beeping sound (usually 8 beeps).
The HP BIOS Update screen displays, and the BIOS update begins automatically. This might take several minutes, and you might hear additional beeping sounds.
If the HP BIOS Update screen does not display, repeat the previous steps. If the issue persists after repeating the steps, skip to the next step to Download a replacement BIOS file.
If the Power light turns off, the notebook has turned off because the Power button was held too long. Repeat the previous steps, making sure to hold the Power button for 2 to 3 seconds only.
(By the end of this article all the issues should be resolved)
Let me know how that pans out,
If you feel I was helpful, simply click on Accept as Solution to help the community grow,
That said, I will have someone follow-up on this to ensure you've been helped,
Just in case you don't get back to us within 24 - 48hrs, and have a good day, ahead.
I am an HP Employee
11-21-2019 01:07 PM - edited 11-21-2019 01:08 PM
The first method with a hard reset did not help after trying to install the bios update, the bios error also popped up did not support insydeflash on the bios flash drive, I can’t install it there is not such an installer, it does not allow the third method with win + b it didn’t help but with win + v it played pawn but not what didn’t open; it was made in 2011
11-21-2019 06:07 PM
@RPG_MoNsTeR If you've gone through all the steps and yet the issue persists, and yet the issue persists, I suggest you talk to HP support and discuss your options, follow the below steps to get started:
1) Click on this link - http://www.hp.com/contacthp/
2) Click on Sign-in or select the product using the below step:
3) Enter the serial of your device.
4) Select the country from the drop-down.
5) Click on "Show Options".
Fill the web-form, to populate a case number and phone number for yourself!
Also, if you are having trouble navigating through the above options, it's most likely because the device is out of warranty, if yes? please send me a private message with the region you are contacting us from,
here's how private messages work: Click here for details.
If you wish to thank me for my efforts, you could click on "Accept as solution" on my post as the solution should help others too.
I am an HP Employee
11-22-2019 01:40 AM - edited 11-22-2019 01:46 AM
I've watched a video of how to make a download flash bios can help me what the files look like in the flash drive and where they lie
That's the way I made a plug boot for bios http://vlab.su/viewtopic.php?p=69222#p69222 But I didn't succeed with a win + b or win + v can I push them like that wrong
11-23-2019 08:51 AM
1) Press and hold the Windows key and the B key at the same time, and then press and hold the Power button for 2 to 3 seconds.
NOTE: On some notebook models, it might be necessary to press and hold the Windows key and the V key.
2) Release the Power button but continue pressing the Windows and B keys. You might hear a series of beeps.
Let me know.
I am an HP Employee