Control panel not displaying when connected to power

[Odima]

HP desk jet 2130 doesn't display on the control panel, scanner doesn't indicate but cartridge holder moves

[The_Fossette]

@Odima

I reviewed your post and I understand that the printer front panel display is not working.

Don’t worry, I assure you I will try my best to get this sorted.

Are you able to make a copy?

Meanwhile, I recommend you follow the below steps and check if it helps.

1. With the printer turned on, disconnect the power cord from the rear of the printer and also unplug the power cord from the wall outlet. 
2. Remove USB cable, if present. 
3. Wait for 2-3 minutes, press and hold the power button on your printer for about 30 seconds to remove any additional charge. 
4. Now plug back the power cable straight to a wall outlet without any surge protector or an extension cord (This is important) and then plug back the power cord to the printer. 
5. Turn on the printer and wait till warm-up period finishes and the printer is idle.

If you continue facing the issue, then follow the steps in the below article and update the printer firmware.

https://support.hp.com/us-en/document/c02919168

Let me know how it goes and you have a great day!

P.S: Welcome to the HP Support Community 😊

If you wish to show appreciation for my efforts, mark my post as Accept as Solution. Your feedback counts!

Cheers!

Stay Home – Stay Safe