HP 15 LAPTOP Windows 10 won't start insted it goes into ERROR CODE : U4GAQ-7JH9M8-MFPWL1-60TA03

[ontop2b]

Laptop 15 HP    Windows 10  Stuck on scanning and repairing drice (C) won't go past 3% left running for three days

I did a digonastic test and it gave me this 

error code:

U4QG9Q-7JH9N4-MFPWL1-6OVCO3

[iomare]

Hi,

The failure code indicates "Hard Disk 1 Quick Test Failure"

So, you will need to replace the Hard Drive and reinstall the OS on the new drive.

You can use a 2.5" SATA3 HDD of max 2TB capacity

https://www.amazon.com/Seagate-BarraCuda-Internal-2-5-Inch-ST500LM030/dp/B01M0AAA6X/ref=sr_1_1_sspa?...

or for a great boost in performance you could use a 2.5" SATA3 SSD

https://www.amazon.com/Crucial-MX500-500GB-NAND-Internal/dp/B0784SLQM6/ref=sr_1_1?keywords=mx500&qid...

On page 45 of service manual you can see how to replace the drive

http://h10032.www1.hp.com/ctg/Manual/c04763999

You will need to reinstall the OS. Here is a small guide:

Download media creation tool from Microsoft on PC (on different PC), run and create a bootable pendrive with the OS on it. (there is an explanation on the Microsoft web page on how to create the pendrive). Create the drive with Windows 10 Home 64-bit edition. Windows will automatically activate once installed and connected to the Internet.

https://www.microsoft.com/en-us/software-download/windows10

If you choose this option you will need to use the pendrive to perform a clean install of Windows 10. You might need to disable fastboot and secure boot in BIOS (probably not). So, insert the pendrive in the PC and it should boot directly from the drive. If not, turn off the PC by holding the power button. Press the power button and immediately keep pressing ESC until the startup menu appears and then press F9 and choose the pendrive in the boot menu. Once it boots from pendrive follow the procedure to install Windows.

When finished installing allow Windows to completely update and find all or most drivers. You can follow this process by going into settings > Security and update > click on Verify for updates. You might need to reboot a couple of times.

 I recommend installing HP support assistant which will help keep your drivers up to date and much more. You can download the latest version from here.

https://www8.hp.com/us/en/campaigns/hpsupportassistant/hpsupport.html

Once completely updated you can go into device manager and see if there are any missing drivers (there will be yellow exclamation mark next to the device). You can find these drivers and software on HP support page for your product.

https://support.hp.com/us-en/product/hp-15-f200-notebook-pc-series/7527799/model/7835588/manuals?sku...

You could also insertan extra 4GB of RAM while you are upgrading.

Example:

https://www.crucial.com/usa/en/hp-15-f215dx/CT10452765

Hope it helps,

David

Please click on thumbs up for thanks

Please click on accept as solution if answered your question