05-11-2010 06:36 PM - edited 05-12-2010 10:44 AM
Good evening to all.
I have a problem on my laptop: the gray, graphic bar, of the sensor touch under the display, is no more showed on screen when I try to set the volume. The volume level is adjustable correctly ( the slide cursors of windows mixer works normally ) the mute control is ok, and the dvd controls works good.
I'd updated my machine with a clear copy of Windows 7 home premium x64, without HP software installed, I'd installed all of drivers requested, downloaded from HP service page, and they are showed in device manager, without errors. I would like to know, which is the necessary software that allow the correct display of this utility. Can someone help me?
Thank you very much for the answers.
Solved! View Solution.
05-11-2010 08:18 PM
Install your Media Smart Smart Menu. The software for the volume display is in there. Depending on what version you have you will have to install at least one Media Smart program. Sometimes it takes 3.
I checked and there is no Smart Menu available in W7
Use this one, if it does not work let me know.
http://g.imagehost.org/download/0206/MSMenu Install the one for 64 bit.
It is in a rar file. Go to this link and download the trial to extract it.
05-11-2010 08:44 PM - edited 05-11-2010 08:57 PM
Thank you very much. I have already founded and tried, the media smart smart menu on this site : UserDrivers and Here but I did'nt tried to install any application by mediasmart; only quick launch buttons (with other requested drivers).
That's a good advice. I'm just going to do it. I will inform you.
05-12-2010 08:38 AM
Ok, here I am, I tried your solution:
-Installed the program (smart menu) of your link: not work not compatible or old version.
-Installed smart menu from my links and some mediasmart applications (webcam,dvd,advisor) them working correctly but, the volume bar is STILL NOT SHOWED!
The mistery of the disappeared bar continue ...
05-12-2010 10:54 AM - edited 05-12-2010 10:56 AM
When you performed your clean install, did you happen to save your swsetup file in drive "C" ?
It has the Menu in there that came with Vista, that may have worked. Did you totally reformat the drive, delete it or did you allow the W7 installation disc to create a "Windows Old File" ?
There are many other Menu's to try, but if you had the original one for your machine that would be better.
Not the HP advisor, try the HP video editing software with the others. It's quite large, but I am experimenting here.
05-12-2010 04:48 PM - edited 05-12-2010 04:50 PM
mmm ... I'm not sure to catch it very well ... what is the swsetup file ... I only have the 4 recovery disks set created after buy the product.
I have reformatted all of my disk with nothing to save.
Now I will try to install all of the mediasmart applications, step by step, until the bar will be showed (maybe) I hope, again ...
I think that should be a stupid box unchecked anywhere .
05-12-2010 07:12 PM - edited 05-12-2010 07:16 PM
The swsetup file stands for "software setup". Almost everything on the laptop including drivers, and your stock Media Smart Menu would have been in there.
Those three that you have should be enough to get it going. Not including the HP Advisor, loose that one, it's lousy software and your new W7 install is better off with out it.
Ounce you have them installed open one of them up, close it and then restart.
If you don't have any luck I will send you my Menu from my dv8. It should work. Check to see if the menu is installed too. Go to programs and features, it should be there.
Go into the task manager and look under processes, it will be marked as "SMART MENU"
05-12-2010 08:10 PM
Just a suggestion of alternate software to try if all else fails. Follow HaggisCat's suggestions first. Then if all that is missing is still on screen display, many have used this in clean Win 7 installs.( I have tested it myself but don't care for any OSD)
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
05-12-2010 08:15 PM
That's a cool tool. I found that a problem with the HP slider volume control is that you have to have at least one Media Smart program installed for it to work. This depends upon what version it is of course.
- HP PCs - How to Change or Reset Password (Windows 10)
- Downloading or Updating Software and Drivers for HP Computers
- HP PCs - Sleep and Hibernate Issues (Windows 10, 8)
- HP PCs - How to Reset Your Computer to Factory Settings (Windows 10, 8, 7)
- HP PCs - Updating Drivers and Software with Windows Update (Windows 10, 8)