Envy x360 - Got the laptop and it had no system installed no storage installed so I got a bootable usb image and tried a clean install. It boots up reading the usb and allows me to choose the time and language. Then takes me to the screen with the partitions. I clicked next and it started the install then shut down. Did it again and I deleted all the partitions so that it read on disk with unallocated amount of GB. Tried this twice. First time I created new partition and the second time let it create the partitions after hitting next. Each time it starts to install then shuts down. Sometimes it gets to 80 or 90% of getting the files together sometimes only 5 or 10%. Each time just shuts down. Removed the battery and attempted to install using AC power only and it shut down. Removed the RAM leaving only one to check if there was maybe a problem with the RAM, both times(after switching them out) the laptop shut down during install. Please help!
Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".