cancel
Showing results for 
Search instead for 
Did you mean: 
  • ×
    Information
    Know the Benefits of your HP account

    Connect with HP support faster, manage all your devices in one place, view warranty information and more– Click Here

    Information
    Fix Windows 10 Update Issues

    Resolve Windows 10 or update issues on HP computer or printer– Click Here

  • post a message
  • ×
    Information
    Know the Benefits of your HP account

    Connect with HP support faster, manage all your devices in one place, view warranty information and more– Click Here

    Information
    Fix Windows 10 Update Issues

    Resolve Windows 10 or update issues on HP computer or printer– Click Here

  • post a message
Highlighted
New member
1 0 0 0
Message 1 of 2
63
Flag Post

laptop freezes at startup

HP Recommended
HP Pavilion 71150
Microsoft Windows 10 (32-bit)

I have a HP Pavillion G71150 with Windows 7 that is freezing at startup. Laptop never gets to Windows sign on screen.

Was able to get to command prompt and attempt to run in Safe Mode but nothing happened.

Was also able to select "chkdsk" but could not perform a restart. No option available to do this.

Tried the hard boot and selecting Safe Mode and Start Windows Normally but still set at blank screen.

Removed batter and attempted to startup. Same thing occurred.

Also removed power cord from laptop but nothing occurred.

Please help.

1 REPLY 1
Highlighted
HP Support Agent
HP Support Agent
30,853 30,757 2,552 3,850
Message 2 of 2
Flag Post
HP Recommended

@shieldskh Here are a few steps that should help us identify and resolve the issue:

 

Step 1: Run hardware diagnostic tests

Make sure the issue is not hardware related by performing diagnostic tests.

  1. In Windows, search for and open the HP PC Hardware Diagnostics for Windows app.

    If the app is not installed on your computer, download the latest version from the HP Hardware Diagnostics website.

  2. On the main menu, click System Tests.

  3. Click the System Fast Test tab.

  4. Click Run once.

    While the test is running, the time remaining and test result for each component displays on the screen.

  5. If a component fails a test, write down the failure ID (24-digit code) and contact HP Customer Support. The information is also available in the Test Logs on the main menu.

    If no system component failed, continue with these steps.

  6. On the HP PC Hardware Diagnostic app, click System Test, and then click System Extensive Test. The Extensive Test might take several hours to complete.

    • If an issue is not found, continue to the next step.

FOR DETAILS & FURTHER INSTRUCTIONS, USE THIS LINK: CLICK HERE & SKIP TO STEP 2 ONWARD

(By the end of this article all the issues should be resolved)

 

P.S: Welcome to HP Community 😉

 

Keep us posted,

If you would like to thank us for our efforts to help you, 

Give us a virtual high-five by clicking the 'Thumbs Up' icon below, followed by clicking on the "Accept as solution" on this post, 

Have a great day!

Riddle_Decipher
I am an HP Employee

Reply
0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation