battery not working,says 0 % available (plugged in ,charging) ,but not charging it really

[avada]

my hp laptop battery is not working .it shows the battery is charging but in reality not charged.i have tried each n everything from power off and battery taken off and then again insert to software microsoft acpi disabling and uninstalling,but nothing happened.need to get this fixed.plz help

[Echo_Lake]

@avada
Thank you for posting on HP Support Community.

• Are you getting any error message saying plugged in not charging?
• Have you tried with different Ac adapter? Are you using the original Ac adapter?

While you respond to those question, I have a few troubleshooting steps, you could perform to isolate the issue:

Run hardware diagnostics test on battery and Charger:

Use the following steps to open the Component Tests menu.

1. Hold the power button for at least five seconds to turn off the computer.
2. Turn on the computer and immediately press Esc repeatedly, about once every second. When the menu appears, press the F2 key.
3. On the main menu, click Component Tests.
4. The Component Tests menu displays. Your Component Tests menu might be different, depending on the components installed on your computer.
5. To run both tests simultaneously, in the Component Tests menu, click Power Source, and then click Run once. Each component can also be tested individually.

AC Adapter Test:

The AC Adapter test provides an interactive test to determine if the AC power adapter is functioning properly. A good battery is required for this test. Before running the AC Adapter Test, HP recommends verifying that your computer can receive power by connecting a known working AC adapter.

Follow these steps to perform the AC Adapter Test.

• In the Component Tests menu, click Power, and then click an AC Adapter Test.
• Click Run once.
• The AC Adapter Test begins.
• When the test is complete, the results are displayed on the screen.

Battery Test:

Follow these steps to perform the Battery Test:

1. In the Component Tests menu, click Power, and then click Battery.
2. Click Run once. The Battery Test begins.
3. When the battery test is complete, the results are displayed on the screen. For additional battery information, click Battery Details.

If the test passes, continue with these steps:

1. Go to Start, search for Device Manager, and open this result.

2. Expand batteries.

3. Right-click on the ACPI option (usually the 2nd option) and select delete or uninstall. Follow the prompts.

4. Shut down the computer. 

5. Disconnect the charger.

6. Remove the battery.

7. Hold down the power button for 1 minute.

8. Insert the battery only.

9. Attempt to turn the battery on.

If possible, try an alternate charger.

Hope this helps! Keep me posted for further assistance.
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

[avada]

Hi,

Yes I tried with another charger.I am using an original one also.NOT a single  error message is shown.The  steps you told me do ,didnt help me out.When i Ran battery test ,it says deep discharge and everything is good.Kindly suggest me what to do.

[Echo_Lake]

@avada

• Does computer shutdown when Ac adapter is unplugged?

I have a few troubleshooting steps we could try to fix the issue:  

Perform Windows Update and HP Support Assistant:

To check for updates now, select the Start button, and then go to Settings  > Update & security  > Windows Update, and select Check for updates.

Install updates from HP Support Assistant: Go to Download HP Support Assistant to install the tool.

1. To open HP Support Assistant, double-click the HP Support Assistant icon .
2. Click My devices in the top menu, and then click Updates in the My PC or My notebook pane.
3. Click Check for updates and messages to scan for new updates.
4. Review the list of updates. Updates with a yellow information icon are recommended. Updates with a blue information icon are optional.
5. Click the update name for a description, version number, and file size.
6. Select the box next to any updates you want to install, and then click Download and install.

Keep me posted for further assistance.