cancel
Showing results for 
Search instead for 
Did you mean: 
AZADEH1
New member
1 0 0 0
Message 1 of 2
168
Flag Post
HP Recommended

hp laptop pavilion x360 not charging more than 90 %

Example: Pavillion x360 64 bit
Microsoft Windows 10 (64-bit)

hello

 my hp laptop pavilion x360 not charging more than 90 %.

do you have solution to fix the problem?

regards

1 REPLY 1
HP Support Agent
HP Support Agent
10,919 10,891 470 526
Message 2 of 2
137
Flag Post
HP Recommended

hp laptop pavilion x360 not charging more than 90 %

@AZADEH1
Thank you for posting on the HP Support Community.

 

I have a few troubleshooting steps we could try to fix the issue:  

Run hardware diagnostics test on battery and Charger:

Use the following steps to open the Component Tests menu.

  1. Hold the power button for at least five seconds to turn off the computer.
  2. Turn on the computer and immediately press Esc repeatedly, about once every second. When the menu appears, press the F2 key.
  3. On the main menu, click Component Tests.
  4. The Component Tests menu displays. Your Component Tests menu might be different, depending on the components installed on your computer.
  5. To run both tests simultaneously, in the Component Tests menu, click Power Source, and then click Run once. Each component can also be tested individually.

AC Adapter Test:

The AC Adapter test provides an interactive test to determine if the AC power adapter is functioning properly. A good battery is required for this test. Before running the AC Adapter Test, HP recommends verifying that your computer can receive power by connecting a known working AC adapter.

Follow these steps to perform the AC Adapter Test.

  • In the Component Tests menu, click Power, and then click an AC Adapter Test.
  • Click Run once.
  • The AC Adapter Test begins.
  • When the test is complete, the results are displayed on the screen.

Battery Test:

Follow these steps to perform the Battery Test:

  1. In the Component Tests menu, click Power, and then click Battery.
  2. Click Run once. The Battery Test begins.
  3. When the battery test is complete, the results are displayed on the screen. For additional battery information, click Battery Details.

If the test passes, continue with these steps:

1. Go to Start, search for Device Manager, and open this result.

2. Expand batteries.

3. Right-click on the ACPI option (usually the 2nd option) and select delete or uninstall. Follow the prompts.

4. Shut down the computer. 

5. Disconnect the charger.

6. Remove the battery.

7. Hold down the power button for 1 minute.

8. Insert the battery only.

9. Attempt to turn the battery on.

 

Hope this helps! Keep me posted for further assistance.
If I have helped you resolve the issue, feel free to give me a virtual high-five by clicking the 'Thumbs Up' icon below, Followed by clicking on "Accept as solution" from the drop-down menu on the upper right corner, Thank you for posting in the HP Support Community.  Have a great day!

ECHO_LAKE
I am an HP Employee

0 Kudos
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation