Hello, I have a problem with adaptive brightness, which reduces brightness on a dark background and increases on a light background, it is very annoying to the eyes, it interferes with work and not only, there is no “Adaptive brightness” item in the power settings, for some time it turned off through the command line, now does not turn off even through it. Thank you.
Здравствуйте, у меня проблема с адаптивной яркостью, которая снижает яркость на темном фоне и увеличивается на светлом, это очень раздражает глаза, мешает при работе и не только, в настройках питания нет пункта «Адаптивная яркость», одно время она отключалась через командную строку, теперь не отключается даже через нее. Спасибо.
I can't seem to find the specifications for your laptop so I can't verify if you have an Intel or AMD processor but I'm going to assume you have an Intel processor. Let me know if you have have an AMD CPU instead.
Please try the following steps. Please note that the steps below may vary depending on configurations:
Right-click the Desktop and select Intel Graphics Control Panel or search and open Intel Graphics Control Panel
Navigate to Power
Disable Display Power Saving Technology
The wording may vary but it's something along the lines of that. I've verified that this works on my own laptops.
Hello, @EddyK! Thanks for your reply! Yes, you’re right, I have an Intel Core i5 processor, but when I go to the Intel Graphics Control Panel settings and in the Power tab in the "Works from an electric network" section, there are no additional settings except for choosing a mode, in particular, "maximum operating time batteries" , "balanced mode" and "maximum performance" , "maximum performance" was turned on, but I found the setting "display energy-saving technology" in the "Battery-powered" tab, which was disabled. Despite the fact that my laptop is always on charge, I rarely use it without it.
Be alert for scammers posting fake support phone numbers on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".