cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
iplaytennis123 Student
Student
1 0 0 0
Message 1 of 2
15,214
Flag Post
HP Recommended

Blue Light reduction

Hp Pavillion Notebook
Microsoft Windows 10 (64-bit)

Is there any way to make the light coming off the screen "softer" as to not emit as much blue light for when i am typing in the dark?

1 REPLY 1
HP Support Agent
HP Support Agent
16,861 16,714 1,112 1,763
Message 2 of 2
15,162
Flag Post
HP Recommended

Blue Light reduction

Hi @iplaytennis123

 

Welcome to the HP Forums!

 

Thank you for posting your query in this forum, it's a great place to find answers.

 

I reviewed your post and I understand that you want to know how to make the light coming from the screen softer.

 

Don’t worry, we will work together to resolve this issue and It’s a pleasure to assist you in this regard.

 

I recommend you to do a color calibration on your computer and check if it helps. Here is how it is done.

 

  1. Use the Windows key + I keyboard shortcut to open the Settings app.
  2. Click Display.
  3. Click the Advanced display settings link.

  4. Make sure you're using the Recommended screen resolution for your display, and click the Color calibration link to launch the utility.

  5. Click Next to start the process.

  6. The wizard will now walk you through the steps to access the on-screen display menu on your monitor to set specific color settings. Click Next to continue.

    Quick Tip: Before moving to the next step, the utility recommends restoring the default display color settings whenever possible. If you're using a custom configuration, it's a good idea to note those settings in case you want to revert the changes.

  7. Click Next again.
  8. Adjust the gamma settings by moving the slider up or down until the small dots are barely visible, and click Next.

  9. Click Next again.
  10. Find the brightness controls on your monitor and adjust the brightness higher or lower as described in the image below, and click Next to continue.

  11. Click Next again.
  12. Find the contrast controls on your monitor and set it high enough as described in the image below, and click Next to continue.

  13. Click Next again.
  14. Adjust the color balance by moving the slider for the red, green, and blue colors until removing any color cast from the gray bars, and click Next.

  15. Click the Previous calibration or Current calibration button to compare the new changes. If the new color configuration is reasonable, click Finish to apply the settings or Cancel to discard the new configuration.

Let me know how it goes and you have a great day!

 

To simply say thanks, please click the "Thumbs Up" button to give me a Kudos to appreciate my efforts to help. If this helps, please mark this as “Accepted Solution” as it will help several others with the same issue to get it resolved without hassles.

 

Take care.

 

Cheers!

The_Fossette
I am an HP Employee

Reply
0 Kudos
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation