03-10-2014 12:27 PM
Basically, my HP Pavilion G6 screen is broken and I windows boots up and everything, I enter my password and hear the login noise, so then the laptop logs in.
Problem is, when I use my HDMI to connect the notebook to the TV nothing shows up, the TV just stays at "No Signal"
OS is Windows 7 Ultimate 64 bit.
I have tried the following:
Using FN + F4 and pressing the right arrow key 3 times. No affect...
Win + P and pressing the right arrow key 3/4 times. No affect..
Basically before I did a format the display on the TV was working fine and it was showing up, but when I reinstalled Win 7 by putting the HDD in another PC, it installed that Graphic driver instead.
So now my question is, how in the world will I get my HP Pavilion to install its graphics driver without a display screen? I don't know if it has the driver though.
03-12-2014 04:22 PM - last edited on 03-06-2017 09:12 AM by OscarFuentes
Welcome to the HP Forums! I hope you enjoy your experience!
I understand you are experiencing issues connecting a TV to your notebook. I apologize for the inconvenience, but I will do my best to assist you! To troubleshoot the issue, and ensure you are doing everything correctly, please review and apply the information in this HP document: Connecting a Monitor, Projector or TV (Windows 7)
I believe the document will be able to help you. Either way, please provide your results. Thanks for choosing the HP Forums. Have a great day!
03-13-2014 10:11 AM
I can not do half of the things it says on the last steps with a broken HP screen.
I have also tried to use the HDMI then turn on the laptop but not even that installed the driver or w/e it is.
So can you provide me with more help, thanks!
03-17-2014 07:22 AM - last edited on 03-06-2017 09:36 AM by OscarFuentes
Thank you for the response. There is a possibility that the hardware is faulty to the point of no return. I am going to quote some information and final troubleshooting steps from this document: Troubleshooting Black Screen Displays with No Error Messages During Startup or Boot
- If there are no sounds from the computer when the power is turned on, check for a different problem; such as a loose RAM memory chip or disconnected hard drive.
- If you are having trouble viewing the external monitor, click f4 (or the key with this symbol ) to switch the screen image among display devices connected to the system. For example, if a monitor is connected to the computer, pressing this key alternates the screen image from computer display to monitor display to simultaneous display on both the computer and the monitor.
- If an image displays on the external monitor, there may be a graphics driver conflict with the notebook’s LCD display. With the external monitor connected, download and install the latest drivers for your specific computer and graphic chip set.
- If you do not have an external monitor, it may be possible to see an image by switching the LCD display to a low resolution mode. To change the resolution, turn on the computer, and press the f8 key. If the graphic display is working at the BIOS level, a text screen displays and you can select the Enable low-resolution video option. If the graphics display is not working at the BIOS level, contact an authorized repair center.
03-17-2014 10:23 AM
I'm pretty much never going to contact HP with this via phone as I have no warranty and they will make me pay.
Btw, the black screen was just because the screen was broken and all the pixels leaked out if you understand me, it went out day and day until it went black.
And I am completely sure that the HP Laptop is fully working as this only just happened after I reinstalled Win 7 by putting the hard drive in another PC then putting it back into the HP Laptop.
By the way, the fan is going, the hard drive is spinning and the caps lock key is working. It all boots up fine.
It just won't connect to the external monitor, I am 100% sure that the Graphics Driver for the HP Laptop (Intel HD Graphics) because when I inserted it into my other PC, there was only that Graphics driver for that PC, and not the HP Graphics driver.
Is their no other steps? I really can't afford paying for repairs. I have had lots of problems with HP Laptops such as overheating and their screens are very weak, so far I am not a satisfied customer that I have to deal with all these problems.
08-16-2015 11:35 PM
i give you a tip just take out the hard drive of your laptop, attach it to a working desktop pc or a laptop then just remove your password and attach your hard drive again to your laptop then turn it on when it gives you the login sound then simply press and hold the windows icon key and then P 2 or 4 times if the display still not shown then press enter key
Hope that works 4 you..