cancel
Showing results for 
Search instead for 
Did you mean: 
The HP Calculator Community Message Board is moving. While we prepare for the move, we are unable to accept new postings. During the move, you can look for help from other users by visiting https://www.hpmuseum.org/ . Or if you need technical support for your calculator visit: HP Calculators. .
Aaronish
New member
2 1 0 0
Message 1 of 9
5,094
Flag Post

Solved!

HP ProBook 450 G3 - Screen Upgrade

HP Recommended
HP ProBook 450 G3
Microsoft Windows 10 (64-bit)

I have just been given a HP ProBook 450 G3 Business Notebook 15.6" Intel i5-6200U, 8GB RAM,  1TB HDD, AMD Radeon R7 M340 2GB Graphics. It was thought that it had a 1920x1080 FHD display but turns out it only has the HD 1366x768 display.

 

Can this be upgraded?

If Yes, what is the part number that I need to order from HP to do so and approximitley how much would it cost?

 

Thanks

1 ACCEPTED SOLUTION

Accepted Solutions
banhien
Level 19
Level 19
95,892 64,606 12,416 21,383
Message 2 of 9
Flag Post
HP Recommended

Hi,

 

It only has the following options:

 

35.6-cm (14.0-inch), LED backlight, 16:9 aspect ratio, HD eDP – flat
HD, anti-glare, 1366x768, 220 nits, 3.6 mm, 1 or 2 WLAN antennas
HD, anti-glare, 1366x768, 220 nits, 3.6 mm, 1 or 2 WLAN antennas, camera
HD, 1366x768, 3.6 mm, 1 or 2 WLAN antennas, camera, touch panel

FHD eDP – slim
FHD, anti-glare, 1600x900, 220 nits, 3.0 mm, 1 or 2 WLAN antennas
FHD, anti-glare, 1600x900, 220 nits, 3.0 mm, 1 or 2 WLAN antennas, camera

 

This is a VERY expensive upgrade just from 1366x768 to 1600x900.

 

Regards.

BH
***
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.




>

View solution in original post

Was this reply helpful? Yes No
8 REPLIES 8
banhien
Level 19
Level 19
95,892 64,606 12,416 21,383
Message 2 of 9
Flag Post
HP Recommended

Hi,

 

It only has the following options:

 

35.6-cm (14.0-inch), LED backlight, 16:9 aspect ratio, HD eDP – flat
HD, anti-glare, 1366x768, 220 nits, 3.6 mm, 1 or 2 WLAN antennas
HD, anti-glare, 1366x768, 220 nits, 3.6 mm, 1 or 2 WLAN antennas, camera
HD, 1366x768, 3.6 mm, 1 or 2 WLAN antennas, camera, touch panel

FHD eDP – slim
FHD, anti-glare, 1600x900, 220 nits, 3.0 mm, 1 or 2 WLAN antennas
FHD, anti-glare, 1600x900, 220 nits, 3.0 mm, 1 or 2 WLAN antennas, camera

 

This is a VERY expensive upgrade just from 1366x768 to 1600x900.

 

Regards.

BH
***
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.




>

View solution in original post

Was this reply helpful? Yes No
Aaronish
Author
New member
2 1 0 0
Message 3 of 9
Flag Post
HP Recommended

Thanks for the speedy reply

Was this reply helpful? Yes No
Aneffinleaf
New member
1 1 0 0
Message 4 of 9
Flag Post
HP Recommended

You will need a different eDP cable because the one that comes with the 1366 X 768 Probook is only single lane and does not support FHD.   The cable kit from the 17" probook (part #  827031-001) will very likely work, but changing it will take many hours since you will need to completely dismantle your notebook to get at it.  If you are not comfortable taking apart notebooks, don't think about doing it.  The 17" cord is also a fair bit longer than the 15" and has both webcam and display cable.  You will need to take care in taping down/routing the extra slack behind the panel when reassembling

Was this reply helpful? Yes No
1user1
New member
2 2 0 0
Message 5 of 9
Flag Post
HP Recommended

https://www.laptopscreen.co.uk/HP-Compaq-PROBOOK+450+G3+SERIES-model.htm

 

On this web page screen 1366x768 and FullHD screen are compatible for ProBook 450 G3. Is this mean, that you not need to change cable for upgrade to FHD ?

 

Was this reply helpful? Yes No
1user1
New member
2 2 0 0
Message 6 of 9
Flag Post
HP Recommended

In ProBook 450 G3 LCD cable which support both HD and FHD screen has part number DD0X63LC030 and is included in cable kit part number 828418-001. Perhaps to decrease costs, in some ProBook 450 G3 laptops is used  lcd cable DD0X63LC300 for only HD screen. These laptops can not be upgraded to FHD without change the cable. And as mentioned above, this is not an easy job - dismount entire computer.

Was this reply helpful? Yes No
Rinsonline
New member
4 3 0 0
Message 7 of 9
Flag Post
HP Recommended

Hello ,need some help ,  have one probook 450 g3 I5  with edp cable 2 lane DD0X63LC310 and motherboard DAOX63MB6H1  Rev:H ,Hp part 827025-601,  want to install a FHD screen , would like to know if is possible ?

Was this reply helpful? Yes No
jlvanta
New member
5 3 0 0
Message 8 of 9
Flag Post
HP Recommended

Hi

I'm having the same issue.

Just bought a compatible FHD screen

828423 001

Turns out it wont light up.

My edp cable is DD0X63LC320, which when you make a google search it appears as a cross compatible cable with DD0X63LC030
DD0X63LC310 

 

What am I missing here?

Anyone succeded upgrading to FHD on Probook 450 G3???

Was this reply helpful? Yes No
kevin-t
Retired
Retired
20,511 12,997 325 735
Message 9 of 9
Flag Post
HP Recommended

Hello,

Thank you for posting in this thread. Unfortunately based on when the last response was made, I have closed this thread to help keep comments current and up to date. We recommend starting a new thread for your issue by clicking here.
To be more helpful with your post, you can add key information if you desire: 
1. Product Name and Number (please do not post Serial Number)
• Example: HP Pavilion DV2-1209AX or HP Deskjet 3000 Printer CH393A
2. Operating System installed (if applicable)
• Example: Windows XP, Windows Vista 32-bit, Windows 7 64-bit
3. Error message (if any)
• Example: ""Low disk space"" error in Windows
4. Any changes made to your system before the issue occurred
• Examples: Upgrading your Operating System or installing a new software; or installing new hardware like a printer, modem, or router.
If you have any other questions about posting in the community, please feel free to send me a private message!

Thank you


I work on behalf of HP
Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation