SPECTRE x360 convirtable

[Louis2307]

Hello

I have an issue with my brand new SPECTRE x360 convertible 13-ap diamond cut  my screen has gone darker and i can see a mesh wire kind of background on my screen .This happen all of a sadden .

Please help

Thank you

[Riddle_Decipher]

@Louis2307 Greetings from the HP Community!

Here's what you need to do, to identify the issue and resolve it accordingly:

• If not done already, check if it works fine on the BIOS screen to identify if it's either a hardware or a software issue:
  • If it works fine on the BIOS (Accessed while tapping F10 during a restart) it's a software issue & I suggest creating a new user account to check if that works better, for starters)
  • However, if it doesn't work within the BIOS either, I'm afraid it's a hardware malfunction.

While you respond to that, I have a few more steps that should help: 

Perform a power reset (no data loss) using these steps: Click here, proceed to next step if this works

Attempt to run a test from the HP hardware diagnostic tool, using this link: Click here for details.

If the issue appears on the diagnostics, it could again, determine a hardware failure,

If they don't appear on bios & the hardware tests passed: please update the BIOS & Chip-set drivers from the HP website using this link: Click here

if the issue persists, reinstall windows using the recovery partition or the recovery media to fix the issue,
use this link for details on performing the recovery: Click here

Keep us posted,

If you would like to thank us for our efforts to help you, 

Give us a virtual high-five by clicking the 'Thumbs Up' icon below, followed by clicking on the "Accept as solution" on this post, 

Have a great day!