01-18-2018 04:33 PM - edited 01-18-2018 04:37 PM
Hi I bought a HP Spectre x360 Convertible 15-bl1XX (8gen MX150) and noticed a delay in the touch after using the stylus. I checked in your website and this is a specific feature but is very anoying thing and innecesary when windows 10 fall creator update supports system palm rejection.
A lot of people reports this like an error becase is inusable for touch/pen programs like onenote
lot of people returned this machine for this feature
In your Suport page https://support.hp.com/in-en/document/c04706945 you talk about
"If your system supports palm rejection technology, when the active stylus is in use, the touch screen does not respond to input from your hand. Wait approximately 1.5 seconds between using the stylus and using your finger."
So the behavior is intentional.
but In the HP Spectre x360 Convertible 15-bl0XX , apparently, you fix it via firmware.
this is an example of the behavior https://www.youtube.com/watch?v=laLYqBeHqDs&t=10s I have the same issue.
The main thing about this message is:
you can remove the palm rejection from the firmware in the bl1XX too? or at least remove the 1.5 delay pleaseeee!!!!!!!
03-24-2018 01:31 AM
Okay I'm using the 13 inch version. I'm actually going to return it if this does not get solved very soon. I have my exams coming up and have a surface pro and a thinkpad, none of them have this issue. I have the 13-ac0xx. I've tried reg edit and everything. It sucks that you guys update the 15 inch model and not this. Probably never gonan get a HP laptop again if this issue is not solved, and I will return this.
06-13-2018 04:25 PM
Hi all, as explained by AusKW here
HP did fix the issue for the 15 inch but not the 13 inch, after validating that, they decided to refund; good move HP!
We should do the same.