The screen of laptop becomes blank while working.

[hari5245]

The screen becomes blank while working. During switching tabs sometimes it becomes blank and then power button is the only option to get back the screen in order.

[Riddle_Decipher]

@hari5245 Here's what you need to do, to identify the issue and resolve it accordingly:

• check if it works fine on an alternate monitor, if not, in the BIOS screen (if the issue is not limited to switching tabs) to identify if it's either a hardware or a software issue:
  • If it works fine on the BIOS (Accessed while tapping F10 during a restart) it's a software issue & I suggest creating a new user account to check if that works better, for starters)
  • However, if it doesn't work within the BIOS either, I'm afraid it's a hardware malfunction.

While you respond to that, I have a few more steps that should help: 

Perform a power reset (no data loss) using these steps: Click here, proceed to next step if this works

Attempt to run a test from the HP hardware diagnostic tool, using this link: Click here for details.

If the issue appears on the diagnostics, it could again, determine a hardware failure,

If they don't appear on bios & the hardware tests passed: please update the BIOS & Chip-set drivers from the HP website using this link: Click here

if the issue persists, reinstall windows using the recovery partition or the recovery media to fix the issue,
use this link for details on performing the recovery: Click here

P.S: Welcome to HP Community 😉

Let me know how that pans out,

If you feel I was helpful, simply click on Accept as Solution to help the community grow,

That said, I will have someone follow-up on this to ensure you've been helped,

Just in case you don't get back to us within 24 - 48hrs, and have a good day, ahead.