cancel
Joaosc Honor Student
Honor Student
2 1 0 1
Message 1 of 4
221
Flag Post
HP Recommended

Touch screen does not respond after upgrade to Windows 10

Pavilion TouchSmart 14-n019nr
Microsoft Windows 10 (64-bit)

Hi there!

After upgrading my note to Windows 10 touch screen does not respond. How to fix it?

 

Thank you!

3 REPLIES 3
HP Support Agent
HP Support Agent
19,261 18,936 1,577 2,636
Message 2 of 4
172
Flag Post
HP Recommended

Touch screen does not respond after upgrade to Windows 10

@Joaosc


Welcome to the HP Forums,
I hope you're well 🙂

 

As I understand the touchscreen stopped working after you upgraded to windows 10,
don't worry, though, as I have a few steps that should resolve your concern:

 

First, let's start with performing a hard reset to release any excessive static/power that could have caused the issue:

 

To perform a hard reset on a computer with a removable battery, use the following steps:

  1. Turn off the computer.
  2. Remove the computer from any port replicator or docking station.
  3. Disconnect all external connected peripheral devices such as USB storage devices, external displays, and printers.
  4. Unplug the AC adapter from the computer.
  5. Remove the battery from the battery compartment.
  6. Press and hold down the Power button for about 15 seconds to drain any residual electrical charge from the capacitors that protect the memory.
  7. Insert the battery and plug the AC adapter back into the notebook computer, but do not connect any of the peripheral devices.
  8. Press the Power button to turn on the computer.
  9. If a startup menu opens, use the arrow keys to select Start Windows Normally, and then press the Enter key.
  10. After reconnecting each of the peripheral devices, run Windows Update and HP Support Assistant to update all device drivers.

Second, enable the touch screen driver in Device Manager:

  1. In Windows, search for and open Device Manager.
  2. Expand the Human Interface Devices heading.
  3. The touch screen device is labeled HID-compliant touch screen, or similar. Right-click the touch screen device.
  4. If the option to enable the device is included in the menu, click Enable.

If the Enable option does not appear in the menu, continue to the next step:

  1. Reinstall the touch screen driver in Device Manager
  2. Install Windows updates
  3. Update the BIOS and graphics driver
  4. Configure the touch display
  5. Perform a touch screen diagnostic test in HP Hardware Diagnostics UEFI
  6. Adjust the power management settings for your touch screen
  7. Reset your computer
  8. Perform a Microsoft System Restore
  9. Perform an HP System Recovery

Click here to know: How to perform each step.


Let me know if those steps worked for you.  If they did, that’s awesome!  Give us some reinforcement by clicking the solution and kudos buttons, that’ll help us and others see that we’ve got the answers!
Good Luck.

Riddle_Decipher
I am an HP Employee

Reply
0 Kudos
Joaosc Honor Student
Honor Student
2 1 0 1
Message 3 of 4
158
Flag Post
HP Recommended

Touch screen does not respond after upgrade to Windows 10

Hi there!

Thank you very much for your reply and suggestions... I follow all steps with sucees, besides: 

a. Configure the touch display

Didn't show the option - Click Touch input.

b. Perform a touch screen diagnostic test in HP Hardware Diagnostics UEFI

Didn't show the option - Click Touch Screen.
Figure : Touch Screen
 
And didn't work yet.
 
I am 100% sure that my notebook has touch screen feature and didn't work after the upgrade to Windows 10.
 
More suggestions to fix it?
 
Thank you very much, and regards!
HP Support Agent
HP Support Agent
19,261 18,936 1,577 2,636
Message 4 of 4
143
Flag Post
HP Recommended

Touch screen does not respond after upgrade to Windows 10

@Joaosc

 

Thank you for replying to my post,

 

If the Touch screen isn't appearing on the diagnostics,

I recommend checking if the Touch is working on BIOS (Accessed by tapping on F10 while restarting the computer).


If it works on bios, it's a software issue: please revert back to windows 7 to resolve it as either the OS wasn't installed properly (in which case, you can retry the upgrade) or the drivers are not compatible with windows 10 as of now, (you will need to wait for future bios updates that may fix the issue, if you haven't updated the bios, please do)

 

If it doesn't work on BIOS either, it's a hardware failure and requires a hardware service,

 

Let me know how that works,

Regards,

Riddle_Decipher
I am an HP Employee

Reply
0 Kudos
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation