• ×
    Information
    Windows update impacting certain printer icons and names. Microsoft is working on a solution.
    Click here to learn more
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Windows update impacting certain printer icons and names. Microsoft is working on a solution.
    Click here to learn more
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
We have new content about Hotkey issue, Click here to check it out!
HP Recommended
Pavilion 15 cs0064st
Microsoft Windows 10 (64-bit)

Unit beeped 2 times and shut off. No power light, no light on start button. Removed battery and held power button for 30sec. Power supply has 19.5vdc to unit.  40hrs of on time on unit and suspect board is bad. 4 months out of warranty. 

3 REPLIES 3
HP Recommended

@Tim136 Have you attempted to connect the device to an alternate power cord or adapter?

Or check with another wall outlet, excluding any surge protectors to check if it works?

 

Alright, here's the best way to revive the laptop, using the HP Guided Troubleshooter: 

CLICK HERE FOR STEP BY STEP GUIDE

(simply select your description of the issue from the bottom of the screen to gain access to the next set of steps that should resolve your concern).

 

If the above doesn't help or the steps are insufficient, check the below steps:

Let's start with a hard reset of your notebook computer before you try any other troubleshooting steps.

 

Reasons for a hard reset

A hard reset has the following effects:

  • Clears the memory.

  • Reestablishes the connection between the BIOS and the hardware

The following conditions can be helped by the hard reset:

  • Windows stop responding.

  • The display suddenly goes blank.

  • The computer does not wake from sleep or hibernate modes.

  • Software applications freeze or fail to respond.

FOR DETAILS & FURTHER INSTRUCTIONS, USE THIS LINK: CLICK HERE

(By the end of this article all the issues should be resolved)

 

P.S: Welcome to HP Community 😉

 

Let me know how that pans out,

If you feel I was helpful, simply click on Accept as Solution to help the community grow,

That said, I will have someone follow-up on this to ensure you've been helped,

Just in case you don't get back to us, 

have a good day, ahead.

Riddle_Decipher
I am an HP Employee

HP Recommended

I have removed battery and tried restart. I have 19.5vdc to the board inside, but still no power to switch or fans. Suspect mother board has crapped out.

HP Recommended

@Tim136 You may be right about the motherboard, and you've got two option, since the device is out of warranty:

you may order the replacement parts on the HP Parts Store, If you've already looked for it and couldn't find it on the HP Parts Store, you may want to get it locally at the online store such as Amazon or eBay, etc...as the part numbers are universal.

 

Or, If you have an HP authorized service center near by, you should be able to take it to them and have it checked,

Here is a link to HP Service Centers, by Country/Region: Click here

 

If you wish to thank me for my efforts, you could click on "Accept as solution" on my post as the solution should help others too.

Riddle_Decipher
I am an HP Employee

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.