cancel
Showing results for 
Search instead for 
Did you mean: 
chauhan_srijan
New member
1 0 0 0
Message 1 of 2
86
Flag Post
HP Recommended

Solved!

Whenever i connect my Pavillion x360 to the power supply it's touch start's to mess up

Example: Pavilion x360
Microsoft Windows 10 (64-bit)

Whenever i connect my laptop to the power supply it's touch starts to foul up. For example- if i touch with one finger it registers 3-4 dots on the screen

1 REPLY 1
Highlighted
HP Support Agent
HP Support Agent
9,856 9,830 403 470
Message 2 of 2
47
Flag Post
HP Recommended

Solved!

Whenever i connect my Pavillion x360 to the power supply it's touch start's to mess up

@chauhan_srijan
Thank you for posting on the HP Support Community.

  • Did this happen after a recent window or software update?
  • Have you made any hardware/software changes?
  • Did you make any changes to the settings of your PC prior to the issue?

I have a few troubleshooting steps we could try to fix the issue:  

Hard Reset: Follow steps from the link: https://hp.care/2GnkMa8.

BIOS default: 

  1. Turn off the computer and wait five seconds.
  2. Press the Power button to start the computer and repeatedly press the F10 key to enter the BIOS setup menu.
  3. On the BIOS Setup screen, press F9 to select and load the BIOS Setup Default settings.
  4. Press F10 to Save and Exit.
  5. Use the arrow keys to select Yes, then press Enter when asked Exit Saving Changes?
  6. Follow the prompts to restart your computer.

Hope this helps! Keep me posted for further assistance.
Please click “
Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

ECHO_LAKE
I am an HP Employee

Reply
0 Kudos
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation