rjtejeda Honor Student
Honor Student
2 1 0 0
Message 1 of 4
364
Flag Post
HP Recommended

Solved!

mute botton light indicator wont turn on on my laptop. mute button works though.

ENVY touchsmart m7 notebook pc
Microsoft Windows 10 (64-bit)

Mute button light indicator (red) on keyboard wont turn on when i press it. The function itself works though. light just doesnt show.

3 REPLIES 3
Provost Provost
Provost
49520 49492 9890 16844
Message 2 of 4
352
Flag Post
HP Recommended

Solved!

mute botton light indicator wont turn on on my laptop. mute button works though.

Hi,

 

Can you post back with the full Model No. and Product No. of your Envy m7 series notebook - you can usually get this by holding down the fn key and pressing esc, otherwise see Here for a guide on locating this information.

 

Regards,

 

DP-K

---------------------------------------------------------------------------

****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****


Windows Insider MVP

Reply
0 Kudos
rjtejeda Honor Student
Honor Student
2 1 0 0
Message 3 of 4
348
Flag Post
HP Recommended

Solved!

mute botton light indicator wont turn on on my laptop. mute button works though.

thanks!

Reply
0 Kudos
Provost Provost
Provost
49520 49492 9890 16844
Message 4 of 4
338
Flag Post
HP Recommended

Solved!

mute botton light indicator wont turn on on my laptop. mute button works though.

Hi,

 

Try the following.

 

Download the IDT Audio installer on the link below and save it to your Downloads folder.

 

http://ftp.hp.com/pub/softpaq/sp63501-64000/sp63555.exe

 

When done, hold down the Windows key and press R

 

Into the Run window, type devmgmt.msc and hit enter.

 

In Device Manager, expand Sound, Video and Game Controllers.  Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.

 

When complete, download and reinstall the Chipset driver on the following link.

 

http://ftp.hp.com/pub/softpaq/sp63001-63500/sp63408.exe

 

When the Chipset reinstallation has completed, shutdown the notebook.

 

Unplug the AC Adapter and then remove the battery.  Hold down the Power button for 30 seconds.  Re-insert the battery and plug in the AC Adapter.

 

Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu.  Press f9 to load the defaults ( this is sometimes f5, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter.  Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.

 

When windows has reloaded, open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation.  When this has completed, restart the notebook and let windows fully load for a few minutes before checking.

 

Regards,

 

DP-K

---------------------------------------------------------------------------

****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****


Windows Insider MVP

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation