nothing happens after closing the lid

[Luqman2]

I recently purchased HP envy 15 notebook pc and am stuck with an issue. I have already updated all the drivers using HP website and updated windows to the latest version and have changed settings for when the lid is closed to sleep, shutdown and turn off display but nothing seems to work. I also have tried clean installation of windows 10 but nothing seems to turn off the display or shut down the display when I close the lid.

[The_Fossette]

@Luqman2

I reviewed your post and I understand that when you close the lid nothing happens.

Don’t worry, I assure you I will try my best to get this sorted.

I recommend you follow the below steps and check if it helps.

Here is how it is done.

Press ‘Win + I’ shortcut keys to open Windows Settings app.

Click on ‘Update & Security’, then go to the ‘Troubleshoot’ section from the left-side menu.

Scroll downwards a bit and click on the ‘Power’ option.

Click on ‘Run the Troubleshooter’. It will start detecting the problems and if it founds, go ahead fixing it.

If you continue facing the issue, then follow the below steps.

On your keyboard, press ‘Windows key + R’ and type ‘Powercfg.cpl’ in it.

Hit the ‘Enter’ key to open power options in the control panel.

From the left-hand side, click on ‘Choose what the power buttons do’.

Then, click on the link ‘Change settings that are currently unavailable’.

From the bottom given power button options, uncheck the ‘Turn on fast startup’ option.

Click on ‘Save changes’ button.

If the issue persists, follow the below steps.

Go to the ‘Start’ menu and type ‘Control panel’ then hit the ‘Enter’ key.

From the top-right filter, choose ‘Large icons’ and navigate to the ‘Power Options’,

Click and open the ‘Power options’.

Select the power plan according to your requirement and click on ‘Change plan settings’.

Click on ‘Change advanced power settings’.

In the power options windows, click on the button ‘Restore plan defaults’.

Click on ‘Apply’ and then ‘OK’ button.

Let me know how it goes and you have a great day!

P.S: Welcome to the HP Support Community 😊

If you wish to show appreciation for my efforts, mark my post as Accept as Solution. Your feedback counts!

Cheers!

Stay Home – Stay Safe

[Luqman2]

Thanks a lot for the detailed reply but I had already tried the steps you explained above but nothing seemed to work so I had to change the laptop for another one. I even tried installing a clean copy of windows. 

[praveenbv]

@Luqman2,

Request you to follow the below troubleshooting steps.

Please follow the below steps: 

Step 1: Enabling the Keyboard in Windows 

Skip this step if the computer does not enter sleep mode or if the computer wakes unexpectedly. 

Follow these steps to enable your keyboard to wake your computer from sleep mode: 

1. In Windows, search for and open the Device Manager. 

2. Click the arrow next to Keyboards and double-click the name of your keyboard. 

3. If the Power Management tab is available, proceed to the next step. 

If the Power Management tab is not available, click the Change Settings button if it appears below the Device status box. The same Keyboard Properties window opens with the Power Management tab available. 

If you are prompted for an Administrator password or confirmation, type the password or provide confirmation. 

1. Click the Power Management tab and make sure that the box next to Allow this device to wake the computer is checked. 

2. Click OK, and then test to make sure that the keyboard can now wake the computer. If the computer still cannot wake from sleep mode, continue using these steps. 

3. For instructions on how to update the BIOS of your computer, see one of the following HP support documents: Updating the BIOS (Notebooks) 

For more steps, please Click here