touchpad behaves abnormally right after turning on my laptop

[hi61]

right after turning on my pc sometimes my touchpad behaves abnormal ;sometimes becomes invisible ,sometimes does not respond, sometimes left click becomes right,  it occurs only sometimes

what to do?

[praveen196 · Accepted solution]

@hi61 Welcome to HP Community!

I understand that you are facing issues with the touchpad.

First, restart the computer and tap on F10 during restart, once on BIOS screen, move the mouse cursor around to check if it works normally, 

If it does, it would confirm a software issue and you follow the below steps if it doesn't work on its a hardware failure and I would suggest a touchpad replacement. 

 
I recommend you to uninstall any generic synaptic drivers showing up for the touchpad (if available) under hidden devices from the device manager: 

• Click Start, point to All Programs, point to Accessories, and then click Command Prompt. 

• At a command prompt, type the following command , and then press ENTER: 

set devmgr_show_nonpresent_devices=1 

• Type the following command a command prompt, and then press ENTER: 

start devmgmt.msc 

• Troubleshoot the devices and drivers in Device Manager. 
  NOTE: Click Show hidden devices on the View menu in Device Manager before you can see devices that are not connected to the computer. 

• When you finish troubleshooting, close Device Manager. 

• Type exit at the command prompt. 
   
  Note that when you close the command prompt window, Window clears the devmgr_show_nonpresent_devices=1 variable that you set in step 2 and prevents ghosted devices from being displayed when you click Show hidden devices. 

And then download a new version of the synaptic drivers using this link: Click here  

Keep us posted,

If you would like to thank us for our efforts to help you, 

Give us a virtual high-five by clicking the 'Thumbs Up' icon below, followed by clicking on the "Accept as solution" on this post, 

Have a great day!

[hi61]

But it occurs sometimes only

[praveen196]

@hi61

Thank you for the update.

In that case, I would suggets you perform the system reset.

Windows 10 has a reset feature that repairs your computer by reinstalling the operating system. This feature is recommended for recovery because it reinstalls Windows 10 while either preserving your personal data and customizations or removing all your personal data.

You have a choice of two methods to reset your computer.

• If Windows 10 loads correctly, see the section titled Perform a Windows 10 system reset in Windows in this document.

• If Windows 10 does not start correctly, see the section titled Perform a Windows 10 system reset through Windows Recovery Environment in this document.

Have a nice day!!