-
×InformationWindows update impacting certain printer icons and names. Microsoft is working on a solution.
Click here to learn moreInformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
-
×InformationWindows update impacting certain printer icons and names. Microsoft is working on a solution.
Click here to learn moreInformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
- HP Community
- Notebooks
- Notebook Video, Display and Touch
- Re: zbook g3 overheats
Create an account on the HP Community to personalize your profile and ask a question
06-24-2022 10:52 AM - last edited on 06-24-2022 01:01 PM by MayS
Hello all, My zbook 15 g3 overheats near to the screen. I just use vscode and brave. what is the reason for that and what should i do?
Thanks in advance
Solved! Go to Solution.
Accepted Solutions
06-25-2022 05:26 AM - edited 08-16-2022 02:21 AM
Hello @Abu_Khiliwa
In your case: Service is required !
- The computer should be disassembled and checked.
- Thermal paste for CPU GPU and bridges should be renewed
- The function of the fan(s) must be checked
- Short circuit test
- General cleaning ...
If you can't do that, you should have it serviced by a professional notebook (chip level) repair store.
best regards
06-25-2022 05:26 AM - edited 08-16-2022 02:21 AM
Hello @Abu_Khiliwa
In your case: Service is required !
- The computer should be disassembled and checked.
- Thermal paste for CPU GPU and bridges should be renewed
- The function of the fan(s) must be checked
- Short circuit test
- General cleaning ...
If you can't do that, you should have it serviced by a professional notebook (chip level) repair store.
best regards
08-15-2022 04:30 PM
Just went thru g8 and was amazed to see the bad thermal pad usage (instead of covering entire chips they were just half the size of chips and misaligned to great degree) also the thermal paste was too little to be true. (Aligned the pads and added new thermal paste)
Didn't find what you were looking for? Ask the community