06-04-2013 01:39 PM
06-18-2013 05:43 PM
Check in Device Manager if your wireless card is made by Qualcomm and let me know please.
1. Press the Windows key + X
2. Click Device Manager
3. Expand Network Adapters
4. There will be 3 or 4 items listed there. Look for the one that says 'wireless', 'WiFi', '802.11', or something similar. On that same line it will have a brand name and model number. The brand may be Qualcomm Atheros, Ralink, Intel, or Broadcom. Let me know that brand name and the model number beside it.
5. Also let me know the driver version. Double click on that wireless link to open the Properties
6. Click the Driver tab and post the driver version number in your reply please.
It would also help to have your current BIOS version. Press FN + ESC to bring up that information. Look for 'F.##' and let me know what that is.
Once I have those versions, I can recommend an update or other steps. Some people are having issues with the introduction of a Windows 8 computer into their networks. In those cases, the router's current firmware was designed for Windows 7 devices and could probably use an update or settings changes to include the Windows 8 device. Let's check your wireless card's driver version and BIOS version first and then move on to the router configuration and firmware, if necessary.
06-18-2013 06:51 PM
Brand Name and number is Qualcomm Atheros AR9485
Driver version: 10.0.0.212
BIOS version is F.21
And what you described about my router not being able to handle Windows 8 might be right because this is the first W8 computer I have used on its network, while it works fine on all W7 ones I have now or previously.
06-19-2013 12:50 PM - edited 06-24-2013 05:09 PM
Ok thanks so much for that information.
Your BIOS is slightly outdated so here is the latest BIOS version F.34 (which also corrects the low battery beep, if you've experienced that). Download and install it. Your notebook will restart on its own during the installation. Allow it to restart and get back to the Start screen.
Then download and install Qualcomm Atheros wireless driver version 10.0.0.234. This is a legitimate site. It has worked for other users. See the picture below for the correct Download button.
Download and install 10.0.0.234. Restart the computer. Then check your download speed with www.speedtest.net. If you're still getting the same results, let me know the brand and model of your router, please
06-23-2013 02:57 PM
I installed both and restarted, but it didn't seem to help.
My router is a Netgear and I think the model is: Wireless-N 150 Router WNR1000v2.
The router at my other house is older and I can't get to it now, but I'm guessing if I have to do something to this one it would be the same on that one as well?
06-24-2013 05:33 PM
You can try changing the Mode of your network.
Here are the steps to change the Mode of your network:
1. Log into your router's configuration page. Disconnect from the wireless network and plug in an Ethernet cable directly from your computer to your router.
2. Open an internet browser
4. Enter the username: admin and password: password
5. Now you should be at the router configuration page. You are looking for 'Wireless' settings. I can't see what you can see on this page but most configuration pages have a 'Setup' or 'Wireless' tab on the left or at the top.
6. In the wireless tab, look for Mode. Mode should have a drop-down menu with different options. Let me know what those different options are.
7. If you see an option for G Only there, try that one first. Save your changes. Unplug the Ethernet cable from the computer and connect to the wireless network. Then test the download speed.
Let me know what results you get
06-27-2013 04:11 PM
How do I log into the config page? I plugged in the ethernet cable and went to both websites but neither existed and I'm guessing that is because I did not log into the configuration page, but I do not know how to do this.
08-13-2013 03:51 PM
I'm so sorry for the delayed response!
If you're still having this issue, make sure you've got one end of the Ethernet cable plugged into the computer and the other end snugly plugged into one of the numbered ports on the router. You can also try putting the IP address in the address bar.
These steps come directly from Netgear's support site (this link):
Let me know if you have any questions on that. I will definitely keep an eye out for your reply. Again, I sincerely apologize for the delayed response!
- HP PCs - Troubleshooting Wireless Network and Internet (Windows 10)
- HP PCs - Troubleshooting Your Wireless Network and Internet Connection (Windows 7)
- HP PCs - Troubleshooting Wireless Network and Internet (Windows 8)
- HP PCs - Using Bluetooth Devices (Windows 10, 8)
- HP PCs - Slow Internet Troubleshooting (Windows 10, 8)