• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.Windows 11 Support Center.
  • post a message
Check out our WINDOWS 11 Support Center info about: OPTIMIZATION, KNOWN ISSUES, FAQs, VIDEOS AND MORE.
HP Recommended
HP Pavilion — 15-Bc200ur
Microsoft Windows 10 (64-bit)

Hello! I’ve got a trouble with my Wifi adapter. Only after disabling it in Device Manager and turning it back on it has a good speed. Without doing this steps the speed is very low. Also this thing usually happened after  computer wakes up from sleep mode. The latest driver is installed. There is no problem with my router, it works good
Intel(R) Dual Band Wireless-AC 7265

How can I solve this problem?  Help me, please!

1 ACCEPTED SOLUTION

Accepted Solutions
HP Recommended

The solution of my problem I found in another topic

Disable the Power Off option for the adapter:

1. Open Device Manager. (Win Key+R > type devmgmt.msc > OK)

2. Expand the Network adapters.

3. Right click on the Ethernet/Wireless Adapter and click Properties.

4. Click the Power Management tab.

5. Remove the check mark beside Allow the computer to turn off this device to save power.

6. Click OK.

7. Test.

View solution in original post

3 REPLIES 3
HP Recommended

@Zhanna666 

 

Please try

 

(a) Download the following software/driver and save on your computer

              https://ftp.hp.com/pub/softpaq/sp103501-104000/sp103641.exe

(b) Go to Device Manager to uninstall wifi driver and reboot,

(c) Install download driver (above)

(d) Reboot and reconnect it to router.

 

Hope this helps.

 

Regards.

BH
***
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.




>
HP Recommended

Hi! All done, but it didn't help. Still low speed after the sleep mode. 

HP Recommended

The solution of my problem I found in another topic

Disable the Power Off option for the adapter:

1. Open Device Manager. (Win Key+R > type devmgmt.msc > OK)

2. Expand the Network adapters.

3. Right click on the Ethernet/Wireless Adapter and click Properties.

4. Click the Power Management tab.

5. Remove the check mark beside Allow the computer to turn off this device to save power.

6. Click OK.

7. Test.

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.