My network adaptor has been disabled and attempts to enable have failed?

[KenBrig]

I’ve tried to uninstall most recent windows updates but network adapter still not enabled.  Dont know what cause it to be disabled?  Appears the driver failed to install when i turned on laptop, got error (10) comes up in adapter properties pop-up.  Obviously, i cant connect to internet to get additional support from HP or microsoft.  It is Intel Dual Band Wireless-AC 7265 network adaptor.  Any help or suggestions much appreciated!

[Riddle_Decipher]

@KenBrig Note: Please ensure the complete product name/number for a quicker response from the community, as we need to know what we are dealing with to provide an accurate solution: Click here for steps on finding the information we need!

Remember: Do not share any of your personal information such as serial, phone number, email ID, etc.

Meanwhile, Install the latest version of the HP Hardware diagnostics (UEFI) on your device using this link: Click here for details (using Ethernet, if available)

• Hold the power button for at least five seconds to turn off the computer.
• Turn on the computer and immediately press Esc repeatedly, about once every second. When the menu appears, press the F2 key.
• On the HP PC Hardware Diagnostics (UEFI) main menu, click System Tests.
• Click Extensive Test.
• Click Run once, or Loop until error.
• While the test is running, the time remaining and test result for each component display on the screen.

If a component fails a test, write down the failure ID (24-digit code) for when you respond back to us.

P.S: Welcome to HP Community 😉

If you wish to thank me for my efforts, you could click on "Accept as solution" on my post as the solution should help others too.