Not Able to discover mirarcast on devices.

[ReyanshVarshney]

No more details avalable with me

[A_Gayathri]

Hi @ReyanshVarshney,

Welcome to the HP Support Community

I understand you are facing an issue with your HP Laptop PC 14-d2000 (2D127AV). Not to worry I will help you to get a resolution to resolve the issue.

Please try the following Troubleshoots steps.

Step 1

1.    Turn off the Unit.

2.    Disconnect the AC adapter.

3.    Remove any discs from the disc drive.

4.    Remove memory cards from the card reader slot.

5.    Disconnect all nonessential peripheral devices, such as printers, scanners, external hard drives, and USB flash drives.

6.    Disconnect the AC adapter press and hold the power button for approximately 15 seconds.

7.    Reconnect the AC adapter, and then turn on the computer.

Step 2

Turn off the unit and please press and hold the Windows key + letter B key and the power button together for 30 seconds after 30 seconds, 1st release the power button but keep holding the Windows key and B key for ten more seconds and then release these two keys If done correctly, you will see the display flashing once. Please attempt it thrice as this step and  Restart the unit

Step3

The unit has to be turned off, Press Win+ V while holding these two keys then Press the Power button, continue to hold all three keys for 30 seconds and then release the Power button first and then release these two keys Please attempt it thrice  and then you may get a Pop-Up CMOS Check and it will restart the unit 

Even if you don't get a Pop-up restart the unit manually after 3 attempts.

If pressing the Connect button in action center doesn't find your device, try the following:

1.Make sure your Windows device supports Miracast by checking the info that came with it or by going to the manufacturer's website.

2.Make sure Wi-Fi is turned on.

3.Make sure the display you want to project to supports Miracast and that it's turned on. If it doesn't, you'll need a Miracast adapter (sometimes called a dongle) that plugs into an HDMI port.

4.Make sure your device drivers are up to date and the latest firmware is installed for your wireless display or adapter (see the support info on the manufacturer's website for instructions or search Microsoft Store for your manufacturer's app to help you).

5.Restart your PC and the wireless display or adapter.

5.To remove the device, select Start > Settings > Devices > Bluetooth & other devices. Under Wireless displays & docks, select the wireless display or adapter, then select Remove device > Yes. Try reconnecting.
 

I hope this helps! Keep me posted. 

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!

[ReyanshVarshney]

Hi @Gaya1239

Is there any easy method?

[A_Gayathri]

@ReyanshVarshney,

Thank you for your response, I really appreciate your efforts. As the issue still persists, I'm sending out a private message to assist you with the next course of action. 

Please check your Private message icon on the upper right corner of your HP Community profile Next, to your profile Name, you should see a little blue envelope, please click on it or simply click on this link.

Hope this helps! Keep me posted for further assistance.

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!