cancel
Showing results for 
Search instead for 
Did you mean: 
northwoody
New member
1 0 0 0
Message 1 of 2
95
Flag Post

cast my laptop screen to my smart tv

HP Recommended
hp spectre x360
Microsoft Windows 10 (64-bit)

trying to get my laptop screen on my smart tv

 

1 REPLY 1
Echo_Lake
HP Support Agent
HP Support Agent
24,879 24,835 1,157 1,191
Message 2 of 2
Flag Post
HP Recommended

@northwoody
Thank you for posting on the HP Support Community.

 

Computers and TVs have a wide variety of video connection types. The video connection on your computer must match the connection on your TV or monitor.

NOTE: If your PC only has DVI and your TV does not have a DVI port, you can use a special adapter or converter cable.
  1. Select a connection type based on your second monitor.

    • Monitor: VGA  or DVI  cable

    • TV: Video (composite)  or S-video  cable

    • High Definition TV: DVI  or HDMI  cable

  2. Connect the TV or monitor to the computer using the cable you chose.

  3. Connect a power cable to the TV or monitor, and then turn it on.

  4. TV connections only: Change the TV video input source to match the video source connection from the computer (Line-1, Video-1, HDMI, etc.). Refer to documents that came with the TV for instructions.

    Depending on the TV, the image quality might not be as good as that of a monitor.

  5. Turn on the computer.

Next, Configure the display with Windows

Extend or duplicate the desktop with a second monitor.

  1. Right-click anywhere on the desktop, and then click Display settings (Windows 10)

  2. Make sure the correct number of monitors displays.

    Windows 10

     

    • If all of your monitor's display, continue with these steps.

      NOTE: Two monitors might display as one, with 1|2 in the center, indicating the same screen duplicated on two monitors. To change to an extended desktop display, continue with these steps.
    • If not all of your monitor's display, make sure the cables are securely inserted and then click Detect.

  3. Scroll down to Multiple displays, if necessary, click the drop-down menu, and then select a display option.

    To set up a wireless monitor, click Connect to a wireless display.

    If you cannot change the display options, go to the section to Configure the display with the graphics driver.

  4. Adjust the screen resolution and orientation, as necessary.

  5. Extended desktop only: Match the monitors on the display to how they are physically positioned. To identify the monitors, click Identify. Numbers display on the monitors to help you arrange them.

  6. Windows 10: Click Keep changes, if necessary, to save the new display settings.

    Windows 8: Click Apply, and then click OK.

Hope this helps! Keep me posted for further assistance.
Please click “
Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

ECHO_LAKE
I am an HP Employee

Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation