cancel
Showing results for 
Search instead for 
Did you mean: 
Marlow1212
New member
1 0 0 0
Message 1 of 2
101
Flag Post

wifi is off, and airplain mode is on, f12 button stays organge for window 8

HP Recommended
hp2000 notebook
Microsoft Windows 8.1 (64-bit)

Hi

I have a HP 2000 note book with window 8.  The wife is always off, even when i turn off airplaine mode.  The f12 button is always orange.  I did a recovery for wireless card but it doesnt change anything.  I tried to press the wifi button on the back of the computer and it still not working.  Can someone help me?  Thank you

1 REPLY 1
TEJ1602
HP Support Agent
HP Support Agent
18,899 18,877 1,559 1,557
Message 2 of 2
Flag Post
HP Recommended

@Marlow1212, Welcome to HP Support Community!

 

Here's a few steps that should help resolve this issue once and for all:


Reset IP/ TCP

  1. Press and hold the button “Windows” and the button “X”.
  2. From the menu that shows up, you will need to left click or tap on the “Command Prompt (admin)” icon.
  3. Now that you have the command prompt with administrative rights in front of the screen you will need to write the following command: “netsh winsock reset catalog” without the quotes.
  4. Press the “Enter” button on the keyboard.
  5. Write the following command: “netsh int ip reset reset.log hit” without the quotes.
  6. Press the “Enter” button on the keyboard.
  7. Now you will need to restart your Windows 10 operating system.
  8. Check and see if you still cannot connect to your wireless network.

Set WLAN Autoconfig to Automatic

  1. Left click or tap on the “Start” button.
  2. In the Start window you need to write the following: “services.msc” without the quotes.
  3. When the search is finished, left click or tap on the “services.msc” icon that pops up.
  4. Now you have a “Services” window in front of the screen.
  5. Look on the right side panel in this window for “WLAN Autoconfig”
  6. Right click or hold tap on the “WLAN Autoconfig” feature.
  7. Left click or tap on the “Properties” feature for the “WLAN Autoconfig” option.
  8. Left click or tap on the “General” tab situated in the upper side of the “Properties” window.
  9. On the right from the “Startup type”, you will need to left click on the drop-down menu and select “Automatic” feature.
  10. Left click or tap on the “Start” button in this window.
  11. Left click or tap on the “Apply” button.
  12. Left click or tap on the “OK” button.
  13. Close all the windows you opened so far and reboot your Windows 8.1 or Windows 10 device.
  14. Check to see if you have your wireless up and running again.

Hope this helps! Keep me posted. 

 

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!

TEJ1602
I am an HP Employee

0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation