wireless card dos not work on Linux

[m135]

my wirless card wich is a wifi  bleutooth combo (rt3290) dose not work  on no matter wat linux distro  or kernel virsion   the wifi shows as (desabeld) and the bleutooth (not availebl ) i tride community drivers and solutions nothing worked . 

[Lil_Boy_Blue]

Hi

Try  NB: I cannot find a 2390 only a 3290

https://askubuntu.com/questions/253632/how-do-i-get-a-ralink-rt3290-wireless-card-working#253660

https://webwiks.com/techcorner/get-ralink-rt3290-wifi-work-linux-distribution/

If in doubt please ask.

[m135]

sorry it was a typo it is the rt3290 wifi  bleutooth combo.

 and that fix dosn't work  .the custom driver dosn't compile succsesfully 

[Lil_Boy_Blue]

So your choices are

Windows.

An alternate adapter.

An external adapter.

[m135]

yep . only windows .

and to use an external wifi card  i had to  blacklist the driver of  rt3290 . whith out doing that even the external wifi doesn't work .it gives me the message of wifi is disabled  .and when i run  rfkill list the output is that the wlo1 is hard blocked .even that my notebook doesn't have a hard switch to disable and enable the wifi card .  

[Lil_Boy_Blue]

Hi

You are DUAL booting and not using Virtualisation?

Next would be...

Courtesy of Bapoumba, Ubuntu Forums
When troubleshooting wireless, it's important that your system is fully updated by opening a terminal, CTRL+ALT+T. Using a wired internet connection, please run:
Code:

sudo apt update
sudo apt dist-upgrade

and reboot if necessary.

If the issues persist, it is recommended that you install pastebinit, by running:
Code:

sudo apt install pastebinit

This will enable the wireless script to, upon your approval, upload the obtained data to pastebin, creating at the same time a link to it in your terminal, permitting you to paste it to a forum thread.

Once that's done, download and run the wireless info script, which will gather information to help diagnose your system. You can run it using this command:
Code:

wget -N -t 5 -T 10 https://github.com/UbuntuForums/wireless-info/raw/master/wireless-info && \
chmod +x wireless-info && \
./wireless-info

It will create the file "wireless-info.txt" at the location it is run from, and depending on its size, an additional archive called "wireless-info.tar.gz". If you prefer, you can post the file directly to pastebin yourself. Sensitive information like MAC addresses and WPA/WEP keys are masked automatically.

If you aren't able to connect to the internet with the affected system, including via a wired connection, just navigate to this link and follow the instructions there on how to the run wireless script without an internet connection.