Note on archived topics.

This topic has been archived. Information and links in this thread may no longer be available or relevant.
If you have a question create a new topic by clicking here and select the appropriate board.
BarryKuma Honor Student
Honor Student
3 0 0
Message 1 of 1
700
Flag Post

Activate TPM on next boot missing - SCCM - BCU

Elitebook 850 G3
Microsoft Windows 10 (64-bit)

We're using SCCM to configure all our notebooks with Windows 10 and using BCU in a tasksequence to configure the correct settings.

 

With both the 820 G3 and the 850 G3 we've run into a problem with activating bitlocker automatically. This happens because a BIOS setting, which was available on the previous models, is missing:

 

Activate TPM on next boot: Enable

 

Why this setting is needed is explained here.

 

Without this option, enabling bitlocker automatically from a tast sequence fails which results in a lot of manual work after SCCM is finished.

 

Until now, I've found no alternative to accomplish this so it seems that the new Elitebooks can't be deployed in a professional way (in a corporate setting). I hope that I'm overlooking something here or that HP will bring back this setting in a future BIOS update?

 

 

Note on archived topics.

This topic has been archived. Information and links in this thread may no longer be available or relevant.
If you have a question create a new topic by clicking here and select the appropriate board.
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation