The HP Community is here for you.
12-15-2008 11:55 PM
dv5-1017nr laptop, 64 bit, vista sp1, Intel P8400, GeForce 9200M GS. I can't get any output on the HDMI port. I've tried different cables and different tv's. First tried booting up with cable hooked up and tv on. Tried the FN+F4 to toggle display and an image comes up in rh bottom of PC display that shows a laptop and an arrow to a tv. I tried the Personalize Display Settings to change display. What am I doing wrong? I did also try to resolve through the HP online chat- he had me go through the same steps then suggested loading the latest Intel chipset drivers after resetting the BIOS. I reset the BIOS to default fine. I tried downloading the chipset drivers but get the error "This computer does not meet the minimum requirements for installing software". I tried loading the previous version and got the same message. I did manage to reload the nvidia drivers OK.
Is this something simple that's different with vista to toggle displays? I'm really starting to not like this computer (
01-25-2013 03:49 PM
01-25-2013 06:06 PM
Yes, I have tried lowest to highest resolutions on the laptop and 5 different HDMI cables, still no luck. The tv screen seems to see something as the message keeps flashing between "No Signal" to "Check cable signal" when the laptop is connected, but the laptop does not send the signal.
01-28-2013 06:15 PM
Are the cables 1.3 or higher?
Try updating the drivers using the following link, assuming you don't have the most recent: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-67044-1&cc=us&dlc=en&lc=en&...
Finally, try these steps:
(a) Turn OFF both TV and laptop
(b) Connect cable both ends
(c) Turn ON the TV, If required use TV menu to accept signals from PC (laptop) even using HDMI1/2/3 ...
(d) Turn ON the laptop, go to Display you should see TWO screens (1 and 2), select the TV
01-29-2013 06:47 AM
Well unfortunately, Everything in your list has been done (numerous times). The cable is correct and the drivers have all been updated. These are all the same suggestions given in countless posts from people having the same problem. This seems to be a common problem if you search the web looking for a solution, lots of people having the same issue. Not sure why they put an HDMI port on these machines if they don't work with a simple plug and play.