Note on archived topics.
04-10-2017 07:16 AM
I will try to do a fresh install by booting off of a flash drive and get error 'system pte misuse'. Is anybody else getting this?
I'm being told it will have to be fixed on Microsofts side or HP with a bios update. It is not a driver issue like people are saying cause the hardrive is wiped.
04-10-2017 08:28 AM
Hi, it's me again from Microsoft's forum. I posted the issue too and linked it to your posts here and on MS, just to maximize visibility. My thread is here. You can also try tweeting to HP support @HPSupport. I'll try and avail all the channels I can get to get the news
04-10-2017 08:49 AM - edited 04-10-2017 08:56 AM
I ran into the same problem on a customer's laptop i've been working on since friday. After spending 48 hours working on this **bleep** this ... I found that has to do with the TPM chip. Disable it in the bios and it will start the install but it will BSOD while updating the realtek gigabit ethernet controller and then it will roll the update back.
You can clean install but the ethernet card won't work.
04-10-2017 08:52 AM - edited 04-10-2017 08:55 AM
Yes, it BSOD'ed during the upgrade at 30% and rolled back
It BSODed during the device setup on a new install but upon the second reboot it must have moved on.
Then telling windows to check for a driver update for that device it will BSOD
Installing the Driver from the HP site it will BSOD
Installing the Driver from realtek it will BSOD
Removing the device from the device manager will cause a BSOD the next time it gets to windows and tries to reinstall the device. Upon the second startup it will just have a yellow exclamation mark.
but all works well on the anniversary update.
I feel the only solution will be a new Bios update from HP.
04-10-2017 10:33 AM - edited 04-10-2017 10:33 AM
Well, I hate to say cool, but cool, at least I / we know it's not an issue with this single laptop but with the model in general. My guess is at 32% is where it tries to do something with the ethernet driver