Note on archived topics.
05-31-2016 06:43 AM
I recently upgraded the OS on my old Pavillion dv6700 notebook from Vista to Windows 10. The wireless network adapter often drops out when the device is not in use - it may work okay for days, or sometimes only minutes. Sometimes running the troubleshoot routine resets the adapter and sometimes the adapter has to be disabled and then re-enabled. (Turning the laptop off and on again also works.) I understand that this is an old device, but everything else works fine and even though this problem is relatively easy to rectify, it is annoying.
Is there a simple solution to this issue.
05-31-2016 07:16 AM
See if unchecking the 'allow windows to turn off this device to save power' box on the power options tab for the wireless card works for you.
What model wireless card does your notebook have?
There may be other tweaks you can do on the Advanced tab.
06-03-2016 06:42 AM
Thanks for your reply. I will try the solution re power options.
The wireless card is the original installed Intel Wireless WiFi line 4965AGN
I assume that HP has not updated the driver for this card for Windows 10 - Is that correct?
06-03-2016 06:47 AM
You're very welcome.
Yes, that is correct.
You can try the latest W7 driver and see if that is newer than the one W10 installed.
2nd file on the list is for 64 bit.
I have the 4965 AG in my HP 6910p notebook also running W10 and it works just fine.
Go into the advanced settings for the card and enable WMM, under AdHoc QOS Mode
Here is a typical advanced setup list for Intel cards.
I also set Roaming Agressiveness to Lowest.