Create an account on the HP Community to personalize your profile and ask a question
03-08-2012 09:15 AM
I have a problem with my computer. It freeze when starting. Did F2 startup test. It say.
SHORT DST FAILED : MBWG59-55G624-XD003G-60WG03
I tried with F10 a bios test on hard drive. It say.
HARD DISK 1 QUICK (303)
Specification of my computer.
model HP G62 Notebook PC
system ID 1444
product ID XB065UA#ABC
working on windows7
It is not on warranty anymore
I understand that my hdd is dead... Can you please help me to replace it, or can I save it ?
Solved! Go to Solution.
03-08-2012 09:22 AM
Below is the link to the service manual for your notebook.
You can find the hard drive removal and replacement procedures in chapter 4.
You can purchase any name brand SATA II 2.5" notebook hard drive. It doesn't have to be from HP. You should get one at least the same size or your recovery disks won't work on it if it is much smaller in storage capacity than the one that died.
Based on the test results I believe your hard drive has failed and cannot be saved.
03-08-2012 09:41 AM
Thank you for the fast reply.
I am not very used with computer, Is there a way now to save what is on my hdd or make a recovery disk.
I did a recovery disk when I bought the pc, 2 years ago.
Now, I just did a backup of my files, document,picture, with HP assistant.
Is that enough to recuperate al what I had in my pc.
03-27-2012 11:52 AM
Well, that isn't good!
Sometimes that happens.
You have two choices:
1. Order a recovery disk set by contacting HP at 1-(800)-474-6836 or 1-(877)-231-4351.
If they don't have them anymore, you can order a set from this vendor below.
2. If you can still read the 25 digit product key on the Microsoft Windows COA sticker on the bottom of your PC, you can download the ISO file of Windows 7 Home Premium 64 bit from the link below.
You need to download it in the language that came installed on your PC. (English, French, or Spanish).
Burn the ISO file to a DVD using a DVD burning program that can burn ISO files so that the DVD is bootable.
Burn at the slowest speed you can.
Use the product key on the Microsoft COA sticker on the bottom of your notebook to activate your installation.
Then go to your notebook's support and driver page to install any drivers you need.]