Poly Studio G62 how to power On and Off

[karlaz]

The system powers on when you plug it in to a power source.

Poly recommends the following when powering off or restarting your system:

• Don’t restart or power off the system during maintenance activities (for example, while a software update is in progress).

• If a system restart is necessary, use the system web interface, RestAPI, Telnet, or SSH. If possible, avoid removing power to restart the system.

• Power on your Poly Studio G62 system

  You can use a PoE+ class 4 injector or a PoE+ class 4 Ethernet connection to power your system.

You can use a PoE+ class 4 injector or a PoE+ class 4 Ethernet connection to power your system.

The Poly Studio G62 system doesn't include a power button. The system powers on when connected to a PoE+ class 4 injector or Ethernet switch. If your PoE connection doesn’t provide sufficient power, the system LED changes to blinking red, and the following message displays on the monitor:

"Insufficient Power from System Ethernet Port"\

1	Ethernet connection to the corporate network.
2	PoE+ class 4 power injector.

Procedure

1. Connect the PoE+ LAN port on the Poly Studio G62 system to the Out port on the PoE+ power injector.
2. Connect the In port on the PoE+ power injector to a network Ethernet port.

   Alternatively, you can connect the Poly Studio G62 system directly to a network Ethernet port providing PoE+ class 4 power.